Fluke VIBXPERT EX Short Instructions page 21

Start measurement with ENTER.
2.1 Route view mode:
2.2 Show meas. locations in
tree view:
2.3 Skip element (consid-
ered to be completed):
2.4 AutoSave:
• Meas. tasks with the same sensor are
performed automatically one after the
other.
• Results are saved automatically, if
'AutoSave' is enabled (-> 2.4).
• 'Route is finished' appears, if all mea-
surements have been completed.
Device setup
Device setup
Operation: Measurement

Note
21