Pyle PHSKR12 User Manual page 2

Please read these instructions carefully and retain for future reference.
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF
THIS UNIT. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning ash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of dangerous voltage within the unit
that may be of su cient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
1. Read these instructions.
2. Keep this manual in a safe place for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. To prevent a re or electric shock hazard, do not expose this equipment to rain
or moisture. Do not store and operate this unit near liquid.
6. Clean only with a dry cloth.
7. Do not store or operate this unit near any heat sources such as radiators, heat
registers, stoves or other appliances (including ampli ers) that produce heat.
Keep this unit in a well-ventilated place.
8. Do not ignore the safety purpose of the polarized or grounding plug.
A polarized plug has two blades with one being wider than the other.
A grounding plug has two blades plus a round pin to ground. The wide blade
or the third prong is intended to provide security. If the provided plug does not
t into your outlet, consult an electrician to replace the outlet.
9. Protect the power cord from being walked on or pinched, particularly at the
plug and the point where it exits from the unit. When unplugging from the
electrical outlet, do not pull the cord, rather grasp the plug rmly.
10. Disconnect the unit during lightning storms or when the unit will not be used
for long periods of time.
11. Keep this unit o when connecting it to other devices.
12. After you have completed the installation and connections for the unit,
connect all the other equipment with a low volume level. Once all devices are
connected, slowly increase the volume to achieve the desired level.
13. Before placement, installation, assembly or suspending any product, inspect
all equipment, suspension, cabinets, transducers, brackets and associated
equipment.
2
www.PyleUSA.com