Table of Contents
Advertisement
10.0 DOWNLOADING AND INSTALLING THE NCP-LINK APP
The NCP-DVR2K needs to be used in combination with NCP-LINK App to function correctly.
All major settings on the NCP-DVR2K are edited through the NCP-LINK App.
The system requirements for your smart phone are noted below.
iPhone: iPhone 5 or later using iOS 8.0 and above.
Samsung Galaxy: S3 and later using Android 4.2.2 and above.
For you to correctly connect your smart device to your NCP-DVR2K you will need to have the
NCP-LINK App from the Apple App Store or Google Play Store installed on your smartphone.
You will also need to connect your smart phone to the NCP-DVR2K's WiFi signal using your
smartphone's WiFi settings.
For Android devices: Please search NCP-LINK in the Google Play Store for installation.
Alternatively you can scan the QR code found in the system settings in your dash camera. You
can also scan the QR code on the following page.
For iOS devices: Please search NCP-LINK in the IOS App Store for installation. Alternatively
you can scan the QR code found in the system settings in your dash camera. You can also
scan the QR code on the following page.
For a step by step guide on connecting to your Dash Camera to your smartphone please
follow the steps below.
1.
On your smart device download the NCP-LINK App from the Google Play store if you are
using an Android device, or the iOS App store if you are using an iPhone. You can also
scan the QR code on the following page.
2.
Power up the dash camera and allow 2 minutes for the WiFi connection to start.
11
Advertisement
Table of Contents
