BN Thermic W16CW Instructions

Wi-fi thermostat app connection

1 . P R E P A R A T I O N R E Q U I R E D F O R W I F I C O N N E C T I O N .

You will need an Android 4G mobile phone and wireless router. Connect the wireless router to the mobile phone

and record the Wi-Fi password (you will need it when the thermostat is paired with the Wi-Fi).

Step 1

Download the app to your phone

We recommend you use "Smart RM" available at the App Store. If you already have the app "Smart life" or wish

to use this, the thermostat is also compatible with it.

"Smart RM" App

Step 2

After installing the app, click "register".



Please read the Privacy Policy and press Agree to proceed to the next step. (Fig 2-1).



Registration account name uses your email or mobile phone number. Select Region, then tick "I Agree User

Agreement" box now click "Get Verification Code" (Fig 2-2).

You will receive a 6-digit verification code via email or SMS to enter on the next screen (Fig 2-3).



Please set a password. The Password must contain 6-20 letters and numbers, once set remember it and



click "Done" (Fig 2-4).

Fig 2-1

Fig 2-2

INSTRUCTIONS FOR:-

Wi-Fi Thermostat – APP CONNECTION

iOS Version (Apple Phones)

Fig 2-3

"Smart life" App

Fig 2-4

Table of Contents

Need help?

Do you have a question about the W16CW and is the answer not in the manual?

Page 1 INSTRUCTIONS FOR:- Wi-Fi Thermostat – APP CONNECTION iOS Version (Apple Phones) 1 . P R E P A R A T I O N R E Q U I R E D F O R W I F I C O N N E C T I O N . You will need an Android 4G mobile phone and wireless router.
Page 2 Step 3A Connect your Thermostat to your phone’s Wi-Fi signal (EZ distribution mode) 1. Go to your Wi-Fi setting on your phone and make sure you are connected via 2.4g and not 5g. Most modern routers have 2.4g & 5g connection. 5g connections do not work with the thermostat.
Page 3 Step 3B (Alternative method) (AP mode pairing) Only do this if Step 3A failed to pair the device. 1. On the phone press "Add Device" or " + " in the upper right corner of the app to add the device (Fig 3-1). Under the small appliance section select the device type "Heating Thermostat"...
Page 4 “Home Settings” click on “Home Settings” (in blue). Set up your home or place of work and then click on “Add Member”. When sending a new member an invitation, you must use the BN Thermic Ltd, mobile number or email address they have used to register the app. You can also...