Ppp Internet Connection And Public Ip Address Routing; Quick Start Guide; Command Description - Carrier Access Terminal Server Router Quick Start Manual

PPP Internet Connection and
Public IP Address Routing
Router in Slot 1
ISP Router that provides the Internet connection.
Command
set clock1 a:1
set 1 default
disconnect a:1
disconnect 1
set a:1:all type data
connect a:1:all 1:1:1
rename 1 "LocalUnit" "Boulder"
rename 1 "RemoteUnit" "wan1"
set 1:1 ip address 215.168.21.14
255.255.255.0
add 1 "wan1" static ip network
0.0.0.0
set 1 "wan1" trunk 1
reset 1
Terminal Service Router - Release 1.3
0.0.0.0 1

PPP Internet Connection and Public IP Address Routing

Description
Set primary master transmit clock source
Set Router to default settings
Disconnect all connections to the T1 on the
Controller (slot a)
Disconnect all connections to the router in slot 1
Set the T1-1 of the Controller, Type to Data
Connect all of T1-1 to the Router that is in slot 1
Rename the Axxius 800 from "LocalUnit"
(default) to "Boulder" (LAN)
Rename WAN #1 from "RemoteUnit" (default) to
"wan1"
Set the ethernet IP address, in the conventional IP
address format. (Router LAN)
Adds a static IP network (route) to the WAN
interface
Set the WAN interface named "wan1" to be
mapped to trunk 1
Reboot the router, to enable all configurations set

Quick Start Guide

5