Kenwood KRF-V7090D Instruction Manual page 38

In case of difficulty
Remote control unit
Symptom
Remote control operation is not possible.
38
EN
Cause
• The remote control unit is set to the DVD
player operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
the main system, controlling angle is too large,
or there is an obstacle between this model and
the remote.
• The remote control has not been set to the
operation mode for the KENWOOD DVD player
you wish to control.
Remedy
• Press any of the Input Selector keys to select
the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
controllable range.
• Press the CD/DVD key or DVD/6CH key to
activate the operation mode for the component
you want to control before operation. fl