Names And Functions Of Parts; Main Unit - Kenwood KRF-V7090D Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
*
Input channel
indicators
Input channel indicators
L
light up according to the
incoming audio signals.
"S" indicator will light up
SL S
when the surround com-
ponent of the audio sig-
*Input channel indicators
nals is only 1 channel.
Output channel indicators
A SPEAKERS B
PHONES
1
(POWER ON/STANDBY) key
Use to turn the power ON/STANDBY.
Standby indicator
2 SPEAKERS A/B keys
Use to turn the A/B speakers on or off.
3 ACTIVE EQ key
Use to select ACTIVE EQ setting.
4 BASS BOOST key
Use to select BASS BOOST setting.
5 Surround LED (lighting-emitting diode)
indicators
DSP mode indicator
Lights when the receiver is in the DSP mode.
96kHz fs mode indicator
Lights when the receiver is in the 96kHz
LPCM playback mode.
ACTIVE EQ mode indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode indicator
Lights when the receiver is in the Dolby
Digital mode.
DTS mode indicator
Lights when the receiver is in the DTS mode.
LOUDNESS indicator
Lights when the LOUDNESS is ON.
6 LOUDNESS key
Use to switch the status of LOUDNESS.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition,
the system can be turned ON by remote control unit.
6
EN
CLIP Input mode
MUTE
indicator indicators
indicator
SP MUTE
AUTO DETECT DIGITAL
A B
CLIP
C SW R 6CH INPUT
LFE
SB SR
DSP DOLBY DIGITAL
DTS
96kHz-fs
ACTIVE EQ LOUDNESS
ACTIVE EQ BASS BOOST LOUDNESS DSP STEREO INPUT MODE
DVD/6CH CD/DVD PHONO TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
7 DSP key
&
Use to select any of the DSP mode.
8 STEREO key
)
Use to switch the listen mode to STEREO.
9 INPUT MODE key
¡
Use to select the Input mode.
0 DIMMER key
¡
Use to select the REC MODE.
Use to adjust the brightness of the display.
! VOLUME CONTROL knob
@ MUTE key
⁄
Use to temporarily mute the sound.
# PHONES jack
›
Use for headphone listening.
$ Input Selector keys
™
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select the input sources.
% SOUND key
⁄
Use to adjust the sound quality and the
ambience effects.
^ BAND key
⁄
Use to select the broadcast band.
& AUTO/MONO key
¡
Use to select the auto or manual tuning
¡
mode.
Listen mode indicators
SLEEP indicator
DOLBY DIGITAL EX DTS 96/24 STEREO
DOLBY EX ES MATRIX6.1 96kHzfs
DOLBY PL II x ES DISCRETE6.1 LOUDNESS
Frequency display
Input display
Preset channel display
Display
Surround mode display
DIMMER
MULTI CONTROL
SOUND TONE SETUP
BAND AUTO/MONO MEMORY
º
º
8
£
¤
)
¡
¡
)
¤
¢
¢
RDS indicators
RDS
NEO:6
AUTO indicator
PTY
SLEEP DSP MODE MEMORY indicator
AUTO
MEMORY
STEREO indicator
STEREO
TUNED TUNED indicator
VOLUME CONTROL
DOWN UP
MUTE
LISTEN MODE
AV AUX/GAME
S VIDEO VIDEO L-AUDIO-R
* TONE key
Use to switch the status of TONE control.
( MEMORY key
Use to store radio stations in the preset
memory and to start the Auto Memory.
) SETUP key
Use to select the speakers' settings etc.
¡
keys
Use for selection adjustments during sound,
set up and preset channel functions.
™ MULTI CONTROL knob
Use to control a variety of settings.
£ LISTEN MODE knob
Use to select the listening mode.
¢ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
∞ AV AUX/GAME key
Use to switch the input to AV AUX or GAME.
¡
∞
&
&
º
^
)