Table of Contents
Advertisement
Orbit Reader 40 – User Guide
2.
Insert + J to bring up the JAWS menu.
3.
Press Enter on Options.
4.
Down Arrow to Braille and press Enter.
5.
Tab to Add and press Enter.
6.
Arrow Up or Down to Orbit Reader 40 and press Space to check the box
and select it.
7.
Tab to the Next button and press Enter.
8.
Select USB.
9.
Tab to the Next button and press Enter.
10.
Select Orbit Reader 40 as a primary device.
11.
Tab to the Finish button and press Enter.
12.
Restart JAWS.
Alternative Steps for connecting over Bluetooth:
1.
Press Space + Dots 4 7.
2.
Follow steps 1-7 of the USB connection.
3.
Select the COM port where the Orbit Reader 40 is connected (check
device manager for COM port or use COM port you saved from previous
steps).
4.
Follow steps 9-12 of the USB connection.
To turn off braille support, follow these steps:
1.
Insert + J to bring up the JAWS menu.
2.
Press Enter on Options.
3.
Down Arrow to Braille and press Enter.
Up Arrow to No Braille Display.
4.
5.
Tab to Ok and press Enter.
6.
Restart JAWS.
Note: For a longer description of any of the following commands, turn JAWS
keyboard Help 'on' by pressing Insert + 1 and type the command. Quickly type
the command twice to get an even longer description. Press Insert + 1 again to
exit the JAWS keyboard Help mode.
18.10.4.1 Jaws Commands
18.10.4.1.1 Navigation commands
• To Move display to the left, press Left
• To Move display to the right, press Right
• To Move display up one line, press Up
• To Move display down one line, press Down
• To Pan left one braille window, press Pan Left
• To Pan right one braille window, press Pan Right
Orbit Research
Version 1.9
58
Advertisement
Table of Contents
Troubleshooting
