Orbit Reader 40 User Manual page 31

Orbit Reader 40 – User Guide
Version 1.9
To make a New File, Space + N (Dots 1 3 4 5). The New File command starts the
Editor mode with a new file in which to type. To exit the Editor, press Select
twice.
To make a New Folder, press Space + O (Dots 1 3 5). The New Folder command
opens the Edit Box where you may type the name of the new folder. Pressing
Dot 8 saves the new folder name and returns you to the file list with that folder
selected. If you do not name the folder, pressing Dot 8 names the folder as New
Folder. Press Select to exit without making a new folder.
To delete a file or folder, press Space + D (Dots 1 4 5). This action deletes the
currently selected file(s) or folder(s). Only empty folders and unprotected files
can be deleted. A confirmation is required before the file or folder is deleted.
When the message "-- Confirm action" is displayed, press Dot 8 to confirm or
press Dot 7 to cancel.
To rename a file or folder, press Space + R (Dots 1 2 3 5). The Rename File
command allows you to change the name of a file or folder. To use it, press the
Rename command. The Orbit Reader 40 responds with an Edit Box containing
the original file or folder name. Edit the name or type a new one and press Dot 8.
Press Select to exit without renaming a file or folder. Note: The key input for the
file name should be entered as per the selected system language.
To cut a file, press Space + X (Dots 1 3 4 6). This action cuts the currently
selected file(s) or empty folders from their location and places it (them) on the
clipboard to be used with the paste command.
To copy a file, press Space + C (Dots 1 4). The Copy File command makes a
copy of the currently selected file(s) or empty folders and places it (them) on the
clipboard to be used with the paste command.
To paste a file, press Space + V (Dots 1 2 3 6). This action pastes the file(s) or
folder(s) that are currently on the clipboard into the current location in the File
Manager. If no file or folder is on the clipboard, no action is taken.
To mark a file, press Space + M (Dots 1 3 4). When moving multiple files, use the
Mark File command to mark each individual file before using Cut, Copy, or
Delete. To Mark a file, place arrow on the file and press Space + M.
To clear a marked file, press Space + M again.
File Manager indicates marked files by raising Dots 7 and 8 of the first letter of
the file name.
To Protect or unprotect a file, press Space + P (Dots 1 2 3 4). To protect a file
from accidental changes, arrow to the file and press Space + P. To remove the
31
Orbit Research