Blank Skip; Music Repeat; Tape Counter Display - Kenwood KRC-508S Instruction Manual

Cassette player features

Blank Skip

Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback. This function is on, when unit is first
powered on.
Turning Blank Skip Function On/Off:
Press the B.S button to switch the blank skip function on and
off.
"B.Skip/B.S ON" is displayed when the blank skip function is
turned on.
NOTE
• If the blank space contains much noise, the blank skip function
may not work right.
• Sections recorded at low levels may trigger the blank skip
function if they last for 10 seconds or more.

Music Repeat

Repeatedly plays the track currently being listened to.
Turning Music Repeat On/Off:
Press the REP button to switch music repeat on/off.
"Repeat/REP ON" is displayed when music repeat is turned on.
Canceling Music Repeat:
Press either the REP or PROG button.
NOTE
Music repeat "knows" where a track begins by detecting the blank
space preceding it (the space between tracks). However, when
the blank space lasts for less than four seconds or contains noise,
this function may not operate correctly. Furthermore, sections
that are recorded at low levels may trigger the function if they last
for four seconds or more.

Tape counter display

Switching the Tape display :
Each time you press the DISP button, the display during tape
play switches as follows:
Play side/Tape counter
Clock
Date
Play side
Play side/Tape running
NOTE
• The tape counter is not exact, but only represents an
approximation of the elapsed time.
• The £ indicator lights while the clock is displayed.
— 14 —