Table of Contents
Advertisement
MD/External disc control features
Magazine Random Play
Play the tracks on all the discs in the disc changer in random
order.
1
Press the M.RDM button to switch magazine random play on
and off.
"M-Random ON" is displayed when magazine random play is
turned on.
The disc and track numbers will change over and over in the
display as the next track is being selected.
When the disc/track has been selected, play will begin.
The selected disc/ track number blinks in the display as it is
being played.
NOTE
This function is not available with the following models:
KDC-C200/C300/C400/C301/C401
2
To change the track being heard, press the ¢ button.
Another disc/track will be selected and played.
NOTE
• Magazine random play is canceled when you eject the disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
Text / Title Scroll
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll automatically:
Press the CLK button to display the disc title or the track title.
The display of the text will be scrolled repeatedly.
To scroll manually:
1
Press the CLK button to display the disc title or the track title.
2
Pressing the CLK button for at least one second results in one
scrolling display of the titles.
(
Function of disc changers)
— 16 —
NOTE
• Please see the menu settings (page 21) about switching
between manual scrolling and automatic scrolling.
• You cannot use the text scroll function during magazine random
play.
Presetting Disc Names (DNPS)(
Store the names of discs to be displayed when played.
1
Play the disc whose name you want to preset.
NOTE
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for MDs that you record.
• The disc name preset function cannot be used when a disc title
name or track title is displayed.
2
Press the NAME.S button for at least two seconds.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
3
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
4
Each time the AUTO button is pressed, the characters to be
entered change as listed below.
Press the DISC+ or DISC– button to display the desired
character.
Characters that can be displayed are as follows.
Function of disc changers)
Advertisement
Table of Contents
