General Features; Power; Volume; Attenuator - Kenwood KMD-44 Instruction Manual

Kenwood md receiver instruction manual kmd-44

Hide thumbs Also See for KMD-44:

Table of Contents

General features

ATT indicator

LOUD indicator

Turning on the power:

Press the SRC (source) button.

NOTE

Turn the power on before carrying out the following procedures.

Turning off the power:

Press the PWR OFF button for at least one second.

Increasing Volume:

Press the u button to turn up the volume.

Decreasing Volume:

Press the d button to turn down the volume.

This function allows you to turn down the volume quickly.

Turning Attenuator On/Off:

Press the ATT button to switch the attenuator on and off.

When the attenuator is on, the ATT indicator blinks.

When the attenuator is off, the volume returns to the original

level.

NOTE

Turning the volume up, or turning it all the way down deactivates

the attenuator function.

Switching Modes:

Each time you press the SRC (source) button, the mode

— 6 —

Table of Contents