Table of Contents
Advertisement
About This Chapter
Electrical Installation
Contents of This Chapter:
About This Chapter .................................... 1
.Installing Cables and Adapters ................. 2
Interface and Power Connectors ............... 4
Connecting the Voice Circuits .................... 5
Connecting the Dual T1 Lines ................... 6
V.35 DCE Data Port Connections .............. 7
RS-232 Management ............................... 12
Connecting the Power and Ground ......... 15
5.1 About This Chapter
This chapter describes how to install the communication interface and power connectors on the
Access Bank II SNMP Control Panel and includes procedures for:
•
Enabling the internal lithium battery.
•
Connecting the voice circuits to the punch-down block.
•
Connecting the T1 lines.
•
Connecting the RS-232 Management Port.
•
Connecting the V.35 DCE data port.
•
Using Adapters.
•
Connecting the Power and Ground.
•
Bringing the Access Bank II SNMP on line.
Chapter 5
9/24/01
5-1
Advertisement
Table of Contents
