Silvercrest SGWZ 1 A1 Operation And Safety Notes page 17

{Check for Firmware
8 .
Display the WiFi and ZigBee modules'
firmware version and check for firmware
upgrade .
{Remove Device}:
9 .
Select:
{Disconnect}
–
Remove product from the app . Data
remaining the product's memory .
This operation only resets the product to
offline mode and starts the pairing mode .
If you want to remove all data of the product
and the cloud, read the following point .
{Disconnect and wipe
–
Reset to factory settings .
This function deletes all data from the
product and in the cloud .
Use this function if you pass on,
dispose of or return the product to the
manufacturer .
Make sure that all data on the product
and in the cloud has been deleted .
Follow the instructions in the app .
or
{Cancel}
–
Cancel removing the product .
Upgrade}:
data}
˜ General
{Smart}
tab:
{Tap-to-Run}
tab:
The product offers the possibility to control
several smart Home devices with one click
or with a smart speaker via voice command .
{Automation}
tab:
Set your smart Home devices to perform
certain actions at certain times of day under
certain conditions .
{Me}
tab:
John .Smith@impala .com .hk
Tap the top of the screen to select a new profile
picture and user name, to manage your user
account and to select the temperature unit/time
zone .
(iOS)
GB/IE/NI/MT/CY 17