Advertisement
Step 30
Step
1
D24
Groove
Insert the DRAWER SIDES (D24 and D25) at an
å
angle into the slot at each end of the LARGE
DRAWER FRONT (FF).
3
Fasten the LARGE DRAWER BACK (D69) to the DRAWER SIDES (D24 and D25). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the LARGE DRAWER BOTTOM (D968) inserts into the groove of the LARGE DRAWER BACK (D69).
å
Repeat this step for the remaining drawers.
å
Page 36
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D25
FF
D69
D24
D968
VIEW THE T-LOCK BOX VIDEO
2
D24
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the LARGE DRAWER BOTTOM (D968) into the
å
grooves in the DRAWER SIDES (D24 and D25) and
LARGE DRAWER FRONT (FF).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D25
418653
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D968
D25
FF
30S
(12 used in this step)
www.sauder.com/services
Advertisement
