Laser Safety Information (Eb-Pu2113W/Eb-Pu2213B/Eb-Pu2116W/Eb-Pu2216B) - Epson EB-PU2113W User Manual

• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) with
non-condensing humidity of 20 to 80% or in direct sunlight for long periods of time. Doing so may
cause damage to the case.
• Before you move the projector, make sure its power is turned off, the plug is disconnected from the
outlet, and all cables are disconnected.
• When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with
your local or national laws and regulations.

Laser Safety Information (EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B)

Laser Safety Information (EB-PU2120W/EB-PU2220B)
Laser Safety Labels (EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B)
Laser Safety Labels (EB-PU2120W/EB-PU2220B)
Hazard Distance (HD)
Restriction of Use
Parent topic:
Laser Safety Information (EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B)
Complies with FDA performance standards for laser products except for conformance as a Risk Group 2
LIP as defined in IEC 62471-5: Ed. 1.0. For more information see Laser Notice No. 57, dated May 8,
2019.
This projector contains a high-powered laser component and the following precautions should be taken
when operating the projector to avoid injury or damage:
• Do not open the projector's case. The projector contains a high-powered laser.
• Possibly hazardous optical radiation emitted from this product. Do not look at operating light source.
Eye injury may result.
• Do not expose the light from the projector to optical devices, such as a magnifying glass or reflectors.
Continuing to use the projector in this condition could cause viewers to feel unwell. It could also cause
a fire or accident.
• As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-5:2015.
• This projector may become RG3 when an interchangeable lens with a throw ratio greater than 2.2 is
installed. Refer to the lens list and hazard distance before operation. Such combinations of projector
and lens are intended for professional use only, and are not intended for consumer use.
• Operators shall control access to the beam within the hazard distance or install the product at a height
that will prevent eye exposure within the hazard distance.
Notices
316