Initial Setup - Kenwood DNX6040EX Instruction Manual

Initial setup

Perform this setup when you use this unit first time or when you reset the unit (P.97).
1
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is "American English (en)".
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see
Angle
Adjust the position of the monitor. Default is "0".
1 Touch [SET].
2 Touch desired angle number and [
For detailed operation, see
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is "iPod".
1 Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [
For detailed operation, see
EXT SW
Control the external devices.
1 Touch [SET].
2 Set device name, output pattern, and pulse set for each device. Then, touch [
For detailed operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For detailed operation, see
Language setup (P.72).
].
Monitor angle control (P.74).
].
Panel color coordinate (P.75).
EXT SW setup (P.73).
].
Camera Setup (P.78).
Return to the Top page
Basic Operations
].
Continued
11