Passtech AP300 User Manual page 9

⑦ Input values in 'AP Setting' referring to the description below.
Item
AP Name
RF Channel
BUILD
FLOOR
ROOMS
⑧ Click 'WRITE' button to save the information of the selected AP, and check the message
'Configuration writing OK' from message box.
⑨ Click 'READ' button again to check if the setting values are properly saved.
⑩ If you want to set another AP, follow the steps from ②.
⑪ After setting is completed, click 'EXIT' to close the window.
⑫ Click 'New' button from AP account window to enter new information.
⑬ Input the following items and click 'Save' button to save the entered information.
Version: 1.0
Description
AP name that will be inputted into AP Account in Client program
Assign AP ID on your own, but do not duplicate
Only English alphabet and number are available
(Any space or special characters cannot be contained)
RF Channels you would like to connect (11~25)
Building number (1~50)
Floor number (1~99)
Room numbers (1~999)
9
AP300 (ACCESS POINT) User Manual
http://www.esmartlock.com