Advertisement
64LHP4000
Front Panel Functions
A flip-down door conceals the control panel. Push gently and
release, to open the door. To close the door, lift it back up into
place.
NOTE:
If you accidentally pull the door, it may not shut properly. Push the door
back in to shut it.
1
2
POWER/
TIMER
DOWN LOAD
1 POWER/DOWNLOAD indicator
Lights when power is on. Flashes when downloading the
GUIDE Plus+ program information.
2 Timer indicator
Lights GUIDE Plus+ timer is set.
3 OPC sensor
Sensor to detect the room brightness.
4 POWER button (STANDBY/ON)
Press once to turn on the Rear Projection TV. Press again
to turn off the Rear Projection TV.
5 INPUT button
Press to select your program source. Each press of the
INPUT changes the selection to the next source.
6 CHANNEL buttons
Press plus ' or minus " to tune to a higher or lower
channel. Only the preset channels can be tuned in using
these buttons.
7 RETURN button
Press to set the Rear Projection TV to its initial mode.
In some cases, the door may only open slightly when
pushed.
In such cases, open the door with your finger as shown in
the figure at left.
3
OPC
4
TV
INPUT 1
INPUT 4
INPUT 3
INPUT 2
4
5
POWER
INPUT
STANDBY/ON
6
7
CH
RETURN
Advertisement
