Introduction; Disclaimer; Safety Information - Conlog BEC21 Installation Manual

Congratulations on your new BEC21 electricity meter. This manual contains important information
on the installation. Please take time to read this manual to take full advantage of your meter's many
benefits and features.
Warning and important safety instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when
installing, maintaining, and operating your meter.
Electrical equipment should be installed, operated, serviced and maintained only by a qualified
installation electrician or an Electrical Contractor. No responsibility is assumed by Conlog (Pty) Ltd
for any consequences arising out of the use of this material. An installation electrician or electrical
contractor is one who has skills and knowledge related to the installation, and operation of the
electrical equipment has received safety training to recognize and avoid the hazards involved.
The following symbols are used to draw your attention to the relevant danger level, i.e. the severity
and probability of any danger, in the individual sections of this document.
Hazards or unsafe practices that may result in severe personal injury and/or property
damage.
Hazards or unsafe practices that may result in personal injury and/or property
damage.
Do NOT disassemble.
Follow directions explicitly.
Call the service Centre for help.
Note

Introduction

Disclaimer

Safety Information