Croydex AM302021 Installation Instructions

Flexi-Fix Riser Rail
Please follow these fixing and care instructions to ensure that your product is
fitted safely
and that it retains its high quality finish. Please retain this leaflet for future
reference.
Fixing Pack Contents / Tools Required
Fixing Pack Contents
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
It is recommended that two people fit this product to ensure that it is fitted safely.
Always take care when using power tools, particularly in the bathroom.
Always check for hidden cables and pipework before drilling and take extreme care if there is
any water in the working area.
It is advisable to use a residual current circuit breaker (RCCB)
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
Always ensure that the drill hole passes through the central tiled area rather than through the
grouted area. To prevent damage to the tile, mask the area around the hole with tape before
drilling.
Do not strike the product with hard or sharp objects.
DO NOT USE AS A GRAB RAIL - Suitable for use with standard hoses and shower handsets.
Maximum load 5Kg.
ALWAYS CHECK THE PACKAGING FOR FIXINGS AND PARTS BEFORE THROWING AWAY AND RECYCLING.
PLEASE READ THROUGH AND FULLY UNDERSTAND THE INSTRUCTION LEAFLET BEFORE STARTING THE INSTALLATION
OF THIS PRODUCT.
ENSURE YOU HAVE ALL THE FIXINGS AND PARTS BEFORE ATTEMPTING TO ASSEMBLE OR FIT THIS PRODUCT!
Product Care
To retain the best quality finish, clean product regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners, as these will damage the product.
Important Adhesive Information
- The adhesive is suitable for use on most flat finished surfaces, such as gloss paint, tiles,
polished stone, laminates and textured surfaces.
- Do not use on decorative wall paper finishes.
- Not suitable for unfinished materials such as brick, blockwork, emulsion paint and loose, flaky
surfaces.
- Redecoration may be required on some painted surfaces after removal.
SWR 060 R03