Enclosure C Factory Settings - Carrier DATACOLD 500 T/R User Manual

Enclosure C Factory settings
5. Temperature inputs
5.1. T1 input
5.1.1. Type
5.1.2. Name
5.2. T2 input
5.2.1. Type
5.2.2. Name
5.3. T3 input
5.4. T4 input
6. Digital Inputs
6.1. D1 Input
6.2. D2 Input
6.3. D3 Input
6.4. D4 Input
7. Compartment settings
7.1. Compartment 1
7.1.1. Compartment name
7.1.2. Print T1
7.1.3. Alarm on T1
7.1.4. Print T2
7.1.5. Alarm on T2
7.1.6. Print T3
7.1.7. Alarm on T3
7.1.8. Print T4
7.1.9. Alarm on T4
7.1.10. Print D1
7.1.11. Print D2
7.1.12. Print D3
7.1.13. Print D4
7.2. Compartment 2
7.3. Compartment 3
7.4. Compartment 4
8. Alarm settings
8.1. Alarm group 1
8.2. Alarm group 2
8.3. Alarm group 3
8.4. Alarm group 4
9. Printer settings
9.1. Graph upper limit
9.2. Graph lower limit
9.3. Graph mm. per h.
9.4. User menu
9.5. Delivery ticket setting
9.6. Print time period
9.7. Day start time
9.8. Day end time
10. General settings
10.1. Temperature units
10.2. Sample rate
10.3. Vehicle ID
10.4. Header text
10.5. PIN code
10.6. Correction factor
10.7. Serial number
Factory setting
On
Temperature
Return Air
On
Temperature
Rear
Off
Off
Off, Refrigeration
Off, Back door
Off, Defrost
Off, Side door
On
Comp.1
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No (Yes with Carrier Unit)
Off
Off
Off
Off, Frozen
Off, Chilled
Off, Dry
Off, Free text
+59°F (+15°C)
-22°F (-30°C)
0.4 inches (10 mm)
Yes
Actual+average
10 hour
00:00
18:00
Degrees C
10 min.
AB-1234
Abcdef
1111
+0
Page 27 62-61138-20 (02/03)