Status Menu - Carrier DATACOLD 500 T/R User Manual

3.3.6 Display back light setting
Set the intensity of the back light to your convenience. The light switches
on when you press any button and switches off after 30 seconds.
3.3.7 Keyboard back light setting
Set the intensity of the back light to your convenience. The light switches
on when you press any button and switches off after 30 seconds.
3.3.8 Buzzer volume setting
Change the buzzer volume with [<], [>] and confirm it with [accept].
3.3.9 Buzzer frequency setting
Change the buzzer frequency with [<], [>] and confirm it with [accept].
3.3.10 Buzzer on-time setting
Change the buzzer on-time with [<], [>] and confirm it with [accept].
3.3.11 Display software version
Displays the actual software version of the recorder.
3.4

Status menu

Press RED button (4). The display mode will change between
full menu information or only showing actual temperatures
enlarged :
If a communication with the micro of the refrigeration unit has been validated in Menu 11 (Communication
setting), the status display lay-out is modified as follow :
- Compartment number.
- Set point of the compartment.
- "A" if there is an alarm situation on the refrigeration unit.
- Temperature selected for the compartment or " Defrost on" if
the compartment is defrosting.
Page 16
< > accept <-cncl
3.5 Display back light
setting
< > accept <-cncl
3.6 Keyboard back light
setting
< > accept <-cncl
3.7 Buzzer volume
setting
< > accept <-cncl
3.8 Buzzer frequency
setting
< > accept <-cncl
3.9 Buzzer on-time
setting
< > accept <-cncl
DATACOLD 500 1.00(8)
© 11/12/2002 15:49
< > <-menu
-18 -21
T1 T2
3
T3 T4
Comp.1 (SP –20.0)
-18 -4
T1 T2
62-61138-20 (02/03)
4
A