Bluetooth Function; Time Shift; Pvr (Personal Video Recorder) - TCL 65C825 Operation Manual

Hide thumbs Also See for 65C825:
Table of Contents

Advertisement

Available languages

Available languages

Note: To access the color buttons, you need to press
button on the remote control to display the virtual
remote control keyboard first.
3. Press
to exit EPG.

Bluetooth Function

(* Not available for some models)
®
Bluetooth
is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press
on the remote control to display the
dashboard,
select
(Settings)
accessories and press OK/Right to enter.
2. Select Add accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to WiFi
access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you
face interruptions in audio reception, you should
restart your Bluetooth device to find frequency
with less interferences and if you continue to face
issues you should move closer to TV or increase
space between TV and source of interferences.
®
The Bluetooth
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their
respective owners.

Time Shift

Allows you to pause, fast forward and rewind live TV,
so you don't have to miss any part of your favourite
programmes. Before you use the function, connect a
USB drive to the TV first. For the first time, you should
complete the disk setup for the USB drive.
Press
on the remote control, select
Channels and inputs > Channel > Time shift, then
press OK to confirm.
1. Follow the directions on the screen to do the disk
setup if you use live TV pause for the first time.
2. After the disk setup is done, live TV pause will start,
and the live TV pause menu displays on the screen.
3. When the live TV pause menu disappears and
only the timing of the live TV pause remains on the
screen, you can press OK to call out the live TV
pause menu and operate according to the on-screen
prompt.
4. Press
or
to stop live TV pause and exit.
Notes:

PVR (Personal Video Recorder)

Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to the
>
Remotes and
TV first.
Note: The feature is available only in selected products
1. Press
2. Select Record and press OK to confirm. It starts to
3. Press the blue button to access Settings and use
4. Press OK or
Note: To access the blue button or , you need to press
5. In recording, the PVR mini panel will also show on
6. To watch the recorded programme, exit PVR mode
(Settings) >
Notes:
13
Using More of Your TV
- This feature is available only for digital channels.
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for live TV
pause, the bigger the recording length.
and, due to specific TV network limitations and
country technical requirements, might not be
available in product or place of installation.
Feature might also be blocked by TV network due
to copyright protection (HD content, recording
protection).
on the remote control, select
Channels and inputs > Channel > PVR, then press
OK/Right to enter.
record automatically.
Up/Down/Left/Right to adjust the recording duration.
to stop recording manually, the
recorded file will be saved. In normal operation, the
recording will stop automatically when the recording
duration expires.
button on the remote control to display the
virtual remote control keyboard first.
the screen to indicate the recording progress.
first. Then press
on the remote control and select
(Settings) > Channels and inputs > Channel >
PVR > PVR list and press OK to enter. Select the
related record file and press OK to play. (It is the
same if you record a digital radio programme).
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
(Settings) >

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents