Panasonic EY75A7 Service Manual page 9

Hide thumbs Also See for EY75A7:

4.2.

Removing the interior components.

4.3.

Removing the LED assembly from the housing A.

4.4.

Removing the Fixation cover assembly from the motor assembly.

All manuals and user guides at all-guides.com

Remove the heat resistant tape and then remove the LED assembly

form the housing A.

* Precautions when securing LED assembly in place using heat resistant

tape.

Attach the heat resistant tape at the location shown in the figure below.

Holding the motor assembly, remove the fixation cover assembly, includ-

ing the motor mounting plate from the motor assembly.

1. Disconnect the LED assembly 2-pin connector from

the module assembly.

* Precautions when attaching the 2-pin connector.

Check whether the claw on the connector is engaged

securely with the mating side.

2. Remove the interior components from the housing A.

Table of Contents