Language Settings; Date/Time Settings - JVC GR-D370AH Instructions Manual

Language Settings

The language on the display can be changed.
( pg. 32, 35)
1
Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Set the recording mode to "
4
Press MENU. The Menu Screen appears.
5
Press 4, 3, 1 or 2 to
select " "
(DISPLAY), and press
SET . The
(DISPLAY) Menu appears.
6
Press 4 , 3 , 1 or 2 to
select "LANGUAGE", and
press SET .
7
Press 4 or 3 to select
the desired language,
and press SET or 2 .
Press 1 whenever you
want to return to the
previous menu screen.
8
Press MENU . The
Menu Screen closes.
pg. 20)
M
". ( pg. 16)
LANGUAGE
DEMO
0001
GETTING STARTED

Date/Time Settings

The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. ( pg. 35, 36)
1
Perform steps 1 – 5 in "Language Settings"
on the left column.
2
Press 4 , 3 , 1 or 2 to
select "CLOCK ADJ.", and
press SET . The date
display format is
highlighted.
3
Press 3 or 4 to select
the desired date display
format, then press SET or 2 . Select from
"MONTH.DATE.YEAR", "DATE.MONTH.YEAR"
or "YEAR.MONTH.DATE".
4
Press 3 or 4 to select the time display
format, then press SET or 2 . Select from "24h"
or "12h".
5
Set the year, month, date, hour and minute.
Press 3 or 4 to select the value, then press SET
or 2 . Repeat this step until you have input all the
settings.
NOTE:
Press 1 to return to the previous setting.
6
Press .The Menu screen closes.
MENU
17
EN
CLOCK ADJ .
M NTH O . DATE YEAR . 1 2h
1 2 . 0 6 2 006 .
0 : 05 7 AM