Table of Contents
Advertisement
40
XM-EX90
Press 0 to eject the MD.
6
The data in the memory is written in the MD before it is
INPUT
ejected.
The display shows "UTOC writing" during MD write
operation.
• Be careful not to apply impact to the MD recorder
• The data in the memory is written in the MD also
To correct input characters:
Characters can be corrected only before ENTER is
pressed.
CANCEL
1 Press </4 or ¢/> to move the cursor to the
2 Press CANCEL to erase the character.
3 Input the correct character.
To cancel all input characters:
Characters can be cleared only before ENTER is
pressed.
Press CANCEL to erase all characters then press TITLE.
To exit editing:
Press TITLE before pressing ENTER.
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
when the power is switched to the STANDBY mode
while "EDITING" is being displayed.
character to be corrected.
Advertisement
Table of Contents
