Table of Contents
Advertisement
ENTER
Caution
Once erased, the track can never be restored. An MD containing recording that you do not want to
erase should be protected by sliding the tab (see page 55).
4
5
INPUT
To exit editing:
Press ENTER.
The change made above is entered temporarily in the
memory. The display shows "EDITING".
Press 0 to eject the MD.
The data in the memory is written in the MD before it is
ejected.
The display shows "UTOC writing" during MD write
operation.
• Be careful not to apply impact to the MD recorder
during writing data in the memory in the MD.
Otherwise the recording may be unplayable later.
• The data in the memory is written in the MD also
when the power is switched to the STANDBY mode
while "EDITING" is being displayed.
Press EDIT before pressing ENTER in step 4.
1 2 3 4 5
Decrements by 1.
35
XM-EX90
Advertisement
Table of Contents
