Table of Contents
Advertisement
IM-DR580H
4. T-REC Mode
• When the STOP button is pressed while the REC menu appears, or
in the REC mode or continuous record mode, the mode changes to
the TEST mode stop state.
• Whenever the MENU button is pressed in the REC menu, the target
address changes as follows.
0032 → 03C0 → 0700 → 08A0 → 0950 → 0032 → •••
When the PLAY button is pressed while a target address is dis-
played, continuous playback is performed after searching that
address.
• Whenever the REC button is pressed in the REC mode target
address is displayed, the digit which is changed by the VOLUME +/
– button changes as follows.
0032 → 0032 → 0032 → 0032 → •••
• When the FORWARD button is pressed in the REC mode target
address is displayed, the digit of address specified by the REC
button is set to +1h. (0 to F)
• When the REVERSE button is pressed in the REC mode target
address is displayed, the digit of address specified by the REC
button is set to -1h. (0 to F)
* When the FORWARD/REVERSE button is held down, the setting
changes continuously, one cycle being 100 ms.
• When the VOLUME +/– button is pressed in the REC mode or
continuous record mode, the laser record power changes.
(Servo gain changes also according to record power.)
* After the laser record power is indicated for one second, the
address indication is restored.
•
: Address
•
: Laser power cord
• Operation is disabled if the premastered disc or disc is in miserase-
protected state.
5. MANU 1 Mode
• Adjustment item to be made in AUTO1 mode is performed manually.
• When the VOLUME + button is pressed during adjustment, the
setting increases, and the new setting is output.
• When the VOLUME – button is pressed during adjustment, the
setting decreases and the new setting is output.
• If the VOLUME +/– button is held down, the setting changes
continuously with 100 ms cycle.
*In this operation, the setting change is performed for each digit.
The digit is changed by pressing the REC button.
• If the setting is within the allowable range, the RND display lights.
• When the STOP button is pressed during MANU1 menu or measure-
ment or adjustment, the state is changed to the TEST mode stop
state.
6. MANU 2 Mode
• Adjustment item to be made in AUTO2 mode is performed manually.
• When the VOLUME + button is pressed during adjustment, the
setting increases, and the new setting is output.
• When the VOLUME – button is pressed during adjustment, the
setting decreases and the new setting is output.
• If the VOLUME +/– button is held down, the setting changes
continuously with 100 ms cycle.
*In this operation, the setting change is performed for each digit.
The digit is changed by pressing the REC button.
• If the setting is within the allowable range, the RND display lights.
• When the STOP button is pressed during MANU2 menu or measure-
ment or adjustment, the state is changed to the TEST mode stop
state.
• When the PLAY button is pressed in B-ATT set state, the mode is
changed to the continuous playback mode.
• As for operation during continuous playback refer to "T-PLAY mode
explanation".
[ R P W _
]
– 12 –
7. E_DATA display Mode
• Reversing when REVERSE button is pressed.
• When the STOP button is pressed while the error data indication
menu appears or during error data indication, the mode changes to
the TEST mode stop state.
• Error data E0 is the latest error.
• Error which occurred in the TEST mode is also stored in the memory.
• When the GROUP button is pressed while the error data indication
menu appears, the error data is initialized.
[ C L E A R _ ]
: Error Code
8. NORMAL Mode
• When the STOP button is pressed while the NORMAL menu
appears, the mode changes to the TEST mode stop state.
• Indication during operation Indication of memory capacity on main
unit LCD
(Multi-Link Station)
[
_
_
] + Level meter
: Internal mode
: Address (Cluster section)
: Address (Sector section)
(Remote Control)
[ T N O
_]
: Internal mode
: Address (Cluster section)
• Selection of sound volume, BASS, etc. is possible. (without indica-
tion)
• Recording is also possible.
• If the STOP button is pressed during operation in the NORMAL
mode, the NORMAL mode is cancelled, and the power is turned off.
Advertisement
Table of Contents
