DeWalt DWD024 Original Instructions Manual page 9

Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
DATE CODE POSITION (FIG. 1)
The Date Code (k), which also includes the year of
manufacture, is printed into the housing.
Example:
2015 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Drill
1 Chuck key (DWD024)
1 Depth rod
1 Side handle
1 Instruction manual
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand this
manual prior to operation.
Description (fig. 1)
WARNING: Never modify the power tool
or any part of it. Damage or personal injury
could result.
a. Variable speed trigger switch
b. Lock-on button
c. Forward/reverse lever
d. Chuck
e. Cord protector with key holder
f. Cord set
g. Side handle
h. Depth adjustment rod
i. Mode selector
j. Main handle
k. Date code position
INTENDED USE
These heavy-duty variable speed percssion drills
are designed for professional drilling.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These heavy-duty percussion drills are professional
power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or infirm
persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their safety.
Children should never be left alone with this
product.
Electrical Safety
The electric motor has been designed for one voltage
only. Always check that the power supply corresponds to
the voltage on the rating plate.
Your D WALT tool is double insulated in
e
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to be operated
via a fail-safe isolating transformer with
an earth screen between the primary and
secondary winding.
If the supply cord is damaged, it must be replaced by
a specially prepared cord available through the D
service organization.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to
the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 13 A.
English
WALT
e
9