Asus TUF Z270 MARK 2 Manual page 89

Creating a RAID set
From the utility main menu, select 1. Create RAID Volume and press <Enter>. The
1.
Enter a unique volume name that has no special characters
and is 16 characters or less.
2. Enter a name for the RAID set and press <Enter>.
3. When the RAID Level item is selected, press the up/down arrow key to select a RAID
level to create, and then press <Enter>.
4. When the Disks item is selected, press <Enter> to select the hard disk drives you want
Port Device Model
0 ST3160812AS
1 ST3160812AS
2 ST3160812AS
3 ST3160812AS
Select 2 to 6 to use in creating the volume.
[ ]-Prev/Next
ASUS TUF Z270 MARK 2
Name: Volume 0
RAID Level: aaaaaaaaaaaaaaa
Disks: dssdsdsds
Strip Size:aaaaaaaaaaaaaaaa
Capacity:aaaaaaaaaaaaaa
Sync:aaaaaaaaaa
Create volume
[HELP]
[SELECT DISKS]
Serial # Size
9LS0HJA4 149.0GB
9LS0F4HL 149.0GB
3LS0JYL8 149.0GB
9LS0BJ5H 149.0GB
[SPACE]-SelectDisk
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
[ENTER]-Done
4-7