Information Symbols - Agilent Technologies 100 Automated Disintegration Apparatus Operator's Manual

1 Safety

Information Symbols

CAN ICES-001(A)
100 Operator's Manual
I
Switches main power on
0
Switches main power off
Indicates single-phase alternating current
The apparatus is marked with this symbol when the user shall
refer to the instruction manual in order to protect risk of harm to
the operator and to protect the apparatus against damage.
Confirms that a manufactured product complies with all
applicable European Community directives. The European
Declaration of Conformity is available at:
http://regulations.corporate.agilent.com/DoC/search.htm
Confirms that a manufactured product complies with all
applicable UK Regulation.
The UK Declaration of Conformity is available at:
http://regulations.corporate.agilent.com/DoC/search.htm
Indicates specific equipment meets standards of safety. These
products are safe for use in the workplace for North America.
This product complies with the European WEEE Directive
marking requirements. The affixed label indicates that you must
not discard this electrical/electronic product in domestic
household waste.
NOTE
Do not dispose of in domestic household waste!
To return unwanted products, contact your local Agilent office, or
see http://www.agilent.com
Indicates the product complies with regulatory compliance
requirements of New Zealand and Australia.
ISM1-A ISM classification according to CISPR11/EN55011: ISM Group 1
Class A
This ISM device complies with Canadian ICES-001. Cet appareil
ISM est conforme à la norme NMB-001 du Canada
NMB-001(A)
for more information.
9