Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
21j
Advertisement
Table of Contents
Related Manuals for Cobra 58197
Summary of Contents for Cobra 58197
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Information
Do not install when tired or installing this product. Keep when under the influence of proper footing and balance at alcohol, drugs or medication. all times. This enables better control in unexpected situations. Page 2 For technical questions, please call 1-888-866-5797. Item 58197... -
Page 3: Use Precautions
Damaged or entangled cords increase the risk of electric shock. Service Have your Camera Equipment serviced by a qualified repair person using only identical replacement parts. SAVE THESE INSTRUCTIONS. Item 58197 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Extension Cords
(See Figure A) Figure A: Outlets for 2-Prong Plug Extension Cords Note: Do not use an extension cord with the Power Adapter. Symbology Double Insulated Amperes Volts Alternating Current Page 4 For technical questions, please call 1-888-866-5797. Item 58197... -
Page 5: Specifications
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Item 58197 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Installation Instructions
Components Power Sync Cable Cable Antenna Mounting Hardware Screws Anchors Lens Mounting Base Camera Extension Cable, Power Adapter 45 ft. Power Cable Page 6 For technical questions, please call 1-888-866-5797. Item 58197... -
Page 7: Before Mounting
Base and into anchor are almost flush with mounting surface. holes until the Camera is securely attached to the mounting surface. Position Camera so that Mounting Holes align with anchor holes. Item 58197 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Camera Adjustment
Extension Cable if necessary. CAUTION! The Power Adapter MUST be Connect Power Adapter to Camera. plugged in indoors in a clean, dry location. Camera Power Adapter connected to 120 VAC outlet Page 8 For technical questions, please call 1-888-866-5797. Item 58197... - Page 9 When finished, close cover securely. Sync Cable Sync Button The Camera will operate continuously while the Power Adapter is plugged in. When not using the Camera, unplug the Power Adapter from its electrical outlet. Item 58197 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Inspection, Maintenance, And Cleaning
Camera out of Loosen Vertical/Horizontal Screws, adjustment. tilt/pan Camera as needed, then tighten Screws. Image is upside Camera not mounted Loosen Position Screws, down/sideways. correctly. rotate Camera as needed, then tighten Screws. Page 10 For technical questions, please call 1-888-866-5797. Item 58197... -
Page 11: Parts List
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175434098 when ordering parts. Item 58197 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 58197 and is the answer not in the manual?
Questions and answers