Troubleshooting - AEG FSB32610Z User Manual

44 www.aeg.com
2. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.

11. TROUBLESHOOTING

WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that can
occur can be solved without the need
Problem and alarm code
You cannot activate the appliance.
3. To install the spray arm back, press it
downwards.
10.6 Cleaning the upper
spray arm
Do not remove the upper spray arm. If
the openings in the spray arm are
clogged, remove the remaining particles
of soil with a thin pointed object, e.g. a
toothpick.
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the dedicated
indicator flashes intermittently to indicate
a malfunction and the alarm code.
Possible cause and solution
• Make sure that the mains plug is connected to
the mains socket.
• Make sure that there is no damaged fuse in
the fuse box.