Turn on
Press
.
» The clock radio switches to the last selected source.
Switch to standby mode
Press
to switch the clock radio to standby mode.
» 7KH FORFN LI VHW LV GLVSOD\HG
Set time and date
1 In standby mode, press and hold TIME SET on the back of your
clock radio for more than two seconds.
» [12H] or [24H] begins to blink.
2 Press
/
3 Press TIME SET WR FRQÀUP
» The hour digits begin to blink.
4 Repeat steps 2-3 to set hour and minute.
Note
If clock is not manually set, when iPod/iPhone is connected, the unit
synchronizes time from the iPod/iPhone automatically.
Tip
The accuracy of the transmitted time depends on the docked iPod/iPhone
that transmits the time signal.
All manuals and user guides at all-guides.com
repeatedly to select 12/24 hour format.