DVD-CP72P
11 Disassembly and Main Component Replacement
Procedures
"ATTENTION SERVICER"
Some chassis components may have sharp edges.
Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the
main components.
2. For assembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
11.1. Disassembling the Top Cover
1. Remove the 4 screws each side and 3 screws at rear panel.
11.2. Disassembling the Front Panel
1. Remove the 2 screws.
2. Release 2 claws below.
All manuals and user guides at all-guides.com
20