Care Of The Pressure Gauge And Connection Tubing; Inspecting; Drying; Storage - Pari PEP S System Instructions For Use Manual
Hide thumbs
Also See for PEP S System:
- Reprocessing instructions (48 pages) ,
- Instructions for use manual (32 pages) ,
- Brief instructions (2 pages)
Table of Contents
Advertisement
– 24 –
4.6 Care of the pressure gauge and connection
tubing
Wipe the pressure gauge and connection tubing with a damp
cloth as necessary.
If the connection tubing is visibly soiled, replace it.
4.7 Inspecting
Inspect all product components after each cleaning and disin-
fection. Replace any broken, deformed or seriously discoloured
parts.
4.8 Drying
After each cleaning and disinfection, place all product compon-
ents on a dry, clean and absorbent surface and let them dry
completely.
4.9 Storage
Store this product as described below:
• Wrap all individual components in a clean, lint-free cloth
(e.g. a tea towel).
• Store all individual components in a dry, dust-free place.
Advertisement
Table of Contents
Need help?
Do you have a question about the PEP S System and is the answer not in the manual?
Questions and answers