Table of Contents
Advertisement
aus Additional functions
Programme
7.1 Information for test insti-
tute
Test institutes can request the condi-
tions for comparison tests, e.g. ac-
cording to AS/NZS2007, by sending
an e-mail to dishwasher@test-appli-
ances.com.
These are the conditions for conduct-
ing the tests, however not the results
or consumption values.
The product number (E-Nr.) and the
production number (FD) are required
here. They can be found on the rat-
ing plate on the appliance door.
Open ajar using a block of approxim-
ately 100 mm upon completion of
dry test.
7.2 Favourite
You can save a combination of a pro-
gramme and an additional function to
the
button.
You can save the program via the
Home Connect app or on the appli-
ance.
The pre-rinse program is saved to
this button at the factory. Pre-rinse is
suitable for all types of tableware.
The tableware undergoes intermedi-
ate cleaning via cold rinsing.
1
Depending on the appliance specifications
20
Consumption val-
ues
1) Duration in
hrs:mins
2) Energy con-
sumption in kWh
3) Water con-
sumption in litres
¡ 3) 4,0 - 4,0
Use
Tip: You can use the Home Connect
app to download additional pro-
grammes and save them to the
1
button.
Save Favourite
appliance.
Open the appliance door.
1.
Press
.
2.
Press the right programme button.
3.
Press the button for the relevant
4.
additional function.
→ "Additional functions", Page 20
Press
for 3 seconds.
5.
a The selected programme and the
additional function will flash.
flashes.
a
a The programme and the additional
function are saved.
Tip: To reset the programme, either
use the Home Connect app or reset
your appliance back to the factory
settings.
→ "Overview of basic settings",
Page 34
8 Additional functions
You can find an overview of the addi-
tional functions that can be selected
here. Different additional functions,
which can be found on the control
Programme se-
quence
on the
Advertisement
Table of Contents
