Horizon Reverse Osmosis Seafari Escape 200 Owner's Manual
  1. Manuals
  2. Brands
  3. Horizon Reverse Osmosis Manuals
  4. Water Filtration Systems
  5. Seafari Escape 200
  6. Owner's manual

Horizon Reverse Osmosis Seafari Escape 200 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Horizon Seafari Escape 200 - 600
Revision B - 2012
SYSTEM MODELS
HRO Seafari Escape 200
HRO Seafari Escape 400
HRO Seafari Escape 600
Owner's Manual
Manual PN B651390001B | Revision: 06/01/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Seafari Escape 200 and is the answer not in the manual?

Questions and answers

Related Manuals for Horizon Reverse Osmosis Seafari Escape 200

Summary of Contents for Horizon Reverse Osmosis Seafari Escape 200

  • Page 1 Horizon Seafari Escape 200 - 600 Revision B - 2012 SYSTEM MODELS HRO Seafari Escape 200 HRO Seafari Escape 400 HRO Seafari Escape 600 Owner’s Manual Manual PN B651390001B | Revision: 06/01/13...

  • Page 3: Table Of Contents

    Contents Chapter 1: About this Manual..............7 About Horizon Reverse Osmosis........................7 Purpose................................7 References..............................7 Graphics...............................8 Notice of Liability............................8 Trademarks..............................8 Terms and Conditions...........................8 Copyright...............................8 Revision History............................8 Chapter 2: Introduction................11 Welcome..............................11 Models................................12 Parts Warning.............................12 Warranty and Registration..........................13 Limited Warranty............................13 Cleaning..............................13 Product Changes............................14 Obtaining Warranty Service........................14 Registration..............................14...
  • Page 4 Chapter 7: Commissioning a New System..........43 New System Start-up Procedures ......................43 Pressure Changes............................46 Horizon Reverse Osmosis Seafari Escape NEW SYSTEM INITIAL READINGS........47 Chapter 8: System Daily Operation............49 Day-to-Day Start-up Procedures for the Seafari Escape System...............49 Shutting Down the Seafari Escape System....................50 Chapter 9: System Storage and Cleaning..........51...
  • Page 5 Contents FEED PUMP UW-SE 200-400 1/3HP 24VDC....................81 FEED PUMP UW-SE 200-400 1/3 110-220VDC..................83 B007300011 FEED PUMP UW-SE 600 110/220..................85 B007300017 FEED PUMP UW-SE 600 1/2 24VDC...................87 B008220001 PLANKTON FILTER ASSY UW-SE..................89 B107380001 PREFILTER ASSY UW-SE 05 MIC..................91 B107380002 PREFILTER ASSY UW-SE 25 MIC..................93 B107380004 PREFILTER ASSY UW-SE M4-600..................95 MEMBRANE VESSEL 200 - 600 GPD COMPACT..................97 MEMBRANE VESSEL 200 - 600 GPD MODULAR..................99...

  • Page 7: Chapter 1: About This Manual

    About Horizon Reverse Osmosis Since 1975, Horizon Reverse Osmosis has produced water desalination systems, used in various applications, for customers around the world. Currently, Horizon Reverse Osmosis stands apart as a leader in advanced water desalination systems for leisure marine applications.

  • Page 8: Graphics

    In addition, the use of this manual forms an agreement that Horizon Reverse Osmosis’s trademarked name or Horizon Reverse Osmosis’s trademarked logo mark are not to be used in any form or manner except with Horizon Reverse Osmosis’s written permission. Horizon Reverse Osmosis holds all rights to its copyrights and trademarks, and to the material contained in this manual.
  • Page 9 About this Manual Rev # Date Affected Pages Description 23 November 2009 Multimedia filter installation revision 22 September 2009 General layout and typesetting changes 4 September 2009 4-11 through 4-15, and Replaced wiring diagrams fold-outs 3 August 2009 3-6 through 3-10 Additional installation option diagrams 1 December 2008 Initial release of 2008 models...

  • Page 11: Chapter 2: Introduction

    Chapter Introduction Welcome Congratulations on your purchase of a new Seafari Escape Reverse Osmosis (RO) Desalination System! The Seafari Escape RO Desalination System is a low power water maker, engineered for boaters with limited electrical options. The Seafari Escape features automatic operation and is easy to use with its simple Start and Stop controls.

  • Page 12: Models

    Reverse Osmosis parts; improper installation; and improper operation. Do not use parts, components from any source other than Horizon Reverse Osmosis! The use of third party, non-Horizon Reverse Osmosis parts is strongly discouraged and will result in the following consequences: •...

  • Page 13: Warranty And Registration

    Horizon Reverse Osmosis warrants that the Seafari Escape RO Desalination System performs according to specifications for a period of 12 months from the date of shipment. Horizon Reverse Osmosis’s liability under this warranty is limited to repair or replacement of the Seafari Escape RO Desalination System at Horizon Reverse Osmosis Corporation’s discretion.

  • Page 14: Product Changes

    Horizon Reverse Osmosis will repair or replace, at its option, the product or component therein which upon examination by Horizon Reverse Osmosis appears to be defective. Product Changes Horizon Reverse Osmosis reserves the right to make changes or improvements in its product, during subsequent production, without incurring the obligation to incorporate such changes or improvements on previously manufactured equipment.

  • Page 15: Chapter 3: System Specifications

    Chapter System Specifications Feed Water and Recovery Important: If any of the following components are mismatched, the System will not function properly. The operating pressure and/or amperage draw will be higher than specified, causing damage to one or more components. The operating pressure can also be lower than required, resulting in low product water production and poor product water quality.

  • Page 16: Performance

    RO Membrane Element. External Installation Water Connections Pipe sizes to be supplied by the installer for connection of the Horizon Reverse Osmosis supplied components • Feed Inlet: 5/8” MNPT Male National Pipe Thread U.S. Standard •...

  • Page 17: Operating Amperage

    System Specifications 12 and 24 VDC SE 200 SE 400 SE 600 12V / 24V 12V / 24V Maximum Motor Amps 28 / 13.4 28 / 13.4 Horse Power Recommended Circuit Breaker 30 / 15 30 / 15 Minimum Size Power Wire AWG 6 / 8 6 / 8 Minimum Size Power Wire mm2...

  • Page 18: Weight

    125 lbs. / 59.0 kg SE Compact 400 145 lbs. / 65.8 kg SE Modular 400 140 lbs. / 63.5 kg SE Compact 600 155 lbs. / 70.3 kg SE Modular 600 150 lbs. / 68.0 kg Seafari Escape 200-600...

  • Page 19: Chapter 4: System And Components Description

    Chapter System and Components Description All components supplied by Horizon Reverse Osmosis, both standard and optional, are described in this chapter, along with items that the installer must provide. ALL STANDARD COMPONENTS AND ALL OPTIONAL ACCESSORIES. ** Denotes items supplied by installer...
  • Page 20 They also allow bypass, which results in extensive damage to the High Pressure Pump, as well as to premature fouling of the RO Membrane Element. 14. Inline Pressure Pick-Up Tee for the Prefilter Outlet Pressure Gauge. Seafari Escape 200-600...

  • Page 21: Pressurization Components

    System and Components Description 15. Pre-Filter Outlet Pressure Gauge 0-300 PSI is mounted on the System Control Panel and monitors the outlet pressure of the Pre-Filtration section. This Gauge is used along with the Pre-Filter Inlet Pressure Gauge to determine the condition of the Pre-Filtration Elements. Pressurization Components The Pressurization section of your System supplies the proper pressure across the Membrane Element to produce the required product water within a safe operating condition.

  • Page 22: Fresh Water Flush And Ro Membrane Element Cleaning

    1. Salinity Controller monitors the salt content of the product water via the Salinity Probe, and signals the 3-Way Product Diversion Valve when Potable Water is being produced. The 3-Way Product Diversion Valve, Booster Pump Motor, Remote Control, UV Sterilizer, and Soft Motor Starter are Seafari Escape 200-600...
  • Page 23 System and Components Description each governed by this Controller. This enclosure also contains the high-voltage components of the system. It serves as the connection point for all the electrical systems such as the motors, switches, and valves. 2. Remote Controller*** allows for remote monitoring and controlling of the system. 3.

  • Page 24: Touch Pad Control Descriptions

    Fault Reset Switch is pressed. If the High Pressure Switch senses a high pressure condition during operation the system will shut down immediately and the lamp will illuminate until the Fault Reset Switch is pressed. Seafari Escape 200-600...

  • Page 25: Components Supplied By The Installer Or Owner

    Inlet Thru-Hull Fitting with Forward Facing Scoop The inlet thru-hull fitting must be dedicated to only the Horizon Reverse Osmosis System. It is important that the installer utilizes a forward facing scoop so that the system receives a positive flow of water while the boat is underway.

  • Page 26: Plumbing Connections

    No valves should be installed in this line. Damage to and failure of the system due to a closed valve will not be covered by the Horizon Reverse Osmosis Warranty. • Connection of the Sea Recovery Freshwater Flush subassembly to the boat’s unpressurized potable water line requires a 1/2”...
  • Page 27 System and Components Description 3. Ensure all suction hose connections use two hose clamps rotated 180 degrees with the screw heads facing the same direction. Remove any flash on the hose-barb fittings using fine sandpaper. 4. Ensure all high-pressure hoses have sufficient slack and are not pulled tight into a sharp or immediate bend.

  • Page 29: Chapter 5: Pre-Installation Safety

    Electrician’s tools available. No special system tools are required for installation. A separate TDS Meter, available from Horizon Reverse Osmosis, will assist in confirming System product water quality. A volt/ohm meter (VOM) is required for system installation and commissioning to ensure proper...

  • Page 30: Chemical Precautions

    RO Membrane Element. In this situation, you can use the optional Horizon Reverse Osmosis Fresh Water Flush Accessory to remove the chlorine and bromine from your ship's potable water system before connecting the Seafari Escape RO Desalination System.

  • Page 31: Special Considerations

    Pre-Installation Safety Caution: Do not attempt Installation, commissioning, troubleshooting, or repair of the Seafari Escape RO Desalination System unless you are proficient in the fields/functions listed within the chapter Installer Minimum Qualifications. Caution: The RO Membrane Element is stored in sodium bisulfite. Avoid skin and eye contact with this packaging solution.
  • Page 32 • The Electrical Control Panel Touch Pad must be accessible for operation of the System. • The ETD and RO Membrane Element Pressure Vessel must be accessible for Membrane Element cleaning, rinsing, storing, and winterizing. • Sea Strainer, Prefilters, Charcoal Filter, and pH Neutralizer must be accessible for user changing. Seafari Escape 200-600...

  • Page 33: Chapter 6: Installation

    Damage to any system component due to attachment to uneven surfaces is the responsibility and liability of the installer and is not covered by the Horizon Reverse Osmosis Warranty. • ATTACHMENT: All individual components are supplied with common mounting hardware. Some installations may require different hardware than what has been supplied.
  • Page 34 Eventually, the pump seal will wear and leak from use requiring replacement. Water damage to the motor, if mounted improperly, is the responsibility and liability of the installer and not covered by Horizon Reverse Osmosis Warranty Caution: Mounting of the Booster Pump above water level will cause a vacuum at the inlet of the pump and will result in premature wear resulting from cavitation.

  • Page 35: Electrical Connections

    Installation Caution: Product water may spill during filter element replacing. Therefore, do not mount the charcoal filter above any electrical or electronic component. 13. The ***pH Neutralizing Filter is mounted in an accessible location to a vertical bulkhead after the Charcoal Filter and prior to the UV Sterilizer.

  • Page 36: Required Hose And Tube Connections

    Freshwater Flush Check Valve Freshwater Flush Check Valve ***Plankton Filter ***Plankton Filter Prefilter 25 micron located on the left of the system frame **Unpressurized Potable Water Tank Line Freshwater Flush Pressure Pump Freshwater Flush Carbon Filter Freshwater Flush Check Valve Seafari Escape 200-600...

  • Page 37: Ultraviolet (Uv) Light Installation

    Installation 2. Connect Brine Discharge Line with the supplied 20 feet (6 meters) of 3/8” (9.5 mm) O.D. Brine Discharge Tubing: Step from Outlet of: to Inlet of: ***Discharge Rinse Clean Valve located inside the system frame (center port) ***Discharge Rinse Clean Valve **Rinse Clean bucket or container (left or right port) ***Discharge Rinse Clean Valve...

  • Page 38: Plumbing Requirements

    3. Slowly fill the cylinder with water and flush cylinder for 1 minute. 4. Remove temporary pipe and insert the return pipe into the cylinder port and label the port “Outlet.” 5. Slowly pressurize the UV unit by filling the cylinder with water while checking for leaks. Seafari Escape 200-600...

  • Page 39: Install Lamp

    Installation 6. If leaks are found on the compression nuts, depressurize the unit and slightly tighten the leaking compression nut. 7. Retest until a leak-free installation is verified. 8. Once UV unit is leak-free, the quartz sleeve installation is complete and the UV lamp can be installed. Note: To remove tube from fitting, first remove the C-clamp then push fitting sleeve down.
  • Page 40 Caution: Standard flow rate are based on water temperature 35ºF to 100ºF. If the inlet water temperature exceeds 100ºF (38ºC), please contact your local CSR. Caution: Cycling more than 3 cycles will reduce the end-of-life (EOL) output and/or cause premature lamp failure. Seafari Escape 200-600...
  • Page 41 OVERBOARD BRINE DISCHARGE DISCHARGE OUTLET FRESH WATER TANK INLET PRODUCT REJECT (MANIFOLD FITTING) SYSTEM INLET POTABLE WATER LINE (MANIFOLD FITTING) HORIZON SEAFARI ESCAPE ASSEMBLY POTABLE WATER OUTLET POTABLE WATER (OUTLET) FRESH WATER FLUSH (PRE-CONNECTED) ASSEMBLY CHARCOAL FILTER ASSEMBLY BRINE DISCHARGE OUTLET (PRE-CONNECTED) FEED WATER INLET PRODUCT REJECT...
  • Page 42 BRIINE DISCHARGE SYSTEM PRESSURE POTABLE WATER LINE OUTLET POTABLE WATER OUTLET R.O. BOOST INLET HP IN PRESSURE FEED INLET HP OUT LP IN BRINE DISCHARGE CHARCOAL FILTER ETD CONNECTIONS OUTLET (LP OUT) ASSEMBLY POTABLE WATER (OUTLET) BRINE DISCHARGE OUTLET OVERBOARD PRODUCT WATER DISCHARGE BRINE DISCHARGE...

  • Page 43: Chapter 7: Commissioning A New System

    If the RO Membrane Element Serial Number tag is missing or does not contain a serial number and date, then immediately contact the company that sold the system to you or Horizon Reverse Osmosis. Provide Horizon Reverse Osmosis with the system serial number and model number of this Seafari Escape System.
  • Page 44 11. Open any auxiliary valve within the incoming feed line, Outgoing Brine Discharge Line and Outgoing Product Water Line. Caution: Any auxiliary valve in these lines damages the Horizon Reverse Osmosis System if left closed during starting and/or operation of the system.
  • Page 45 RO Membrane Element, which is not covered by the Horizon Reverse Osmosis Warranty and is the liability of the person commissioning the system. a) If the system will be operated within the next two weeks, no action is necessary. However, if the system will be exposed to freezing temperatures, you must perform winterizing procedures.

  • Page 46: Pressure Changes

    Should the booster pump become worn resulting in reduced pressure and/or flow, it may be returned to Horizon Reverse Osmosis for rebuild or replacement. Because of the specific matching requirements of the wear parts and tight tolerance, it is not practical to repair in the field.

  • Page 47: Horizon Reverse Osmosis Seafari Escape New System Initial Readings

    Commissioning a New System Horizon Reverse Osmosis Seafari Escape NEW SYSTEM INITIAL READINGS At the time of commissioning the NEW system, record the following information after one hour of continuous proper operation of the system. Retain this form in the Owner’s Manual for future reference and troubleshooting.
  • Page 48 ________________________________________________________________________________ Seafari Escape 200-600...

  • Page 49: Chapter 8: System Daily Operation

    1. Open any auxiliary valve within the incoming feed line, Outgoing Brine Discharge Line and Outgoing Product Water Line. Danger: Any auxiliary valve in these lines damages the Horizon Reverse Osmosis System if left closed during starting and/or operation of the system.

  • Page 50: Shutting Down The Seafari Escape System

    If the system will not be operated within the next two weeks, perform a freshwater flush. If the Horizon Reverse Osmosis Automatic Freshwater Flush is installed, ensure that the potable water storage tank has fresh potable water for the freshwater flush to utilize in rinsing the system.

  • Page 51: Chapter 9: System Storage And Cleaning

    Caution: Never expose the RO Membrane Element to chemicals other than those supplied by Horizon Reverse Osmosis. Use caution when operating the system in harbors that may be polluted with chemicals, oil or fuel, as these chemicals may damage the RO Membrane Element beyond repair.

  • Page 52: Fresh Water Flush

    System materials and will dissolve the co-polymer parts. Damage to the System or its components as a result of using third-party chemicals is not covered by the Horizon Reverse Osmosis Corporation Warranty. Fresh Water Flush There must be sufficient Fresh Water in the Potable Water Storage Tank. In order to provide the required water flow to the System during the Fresh Water Flush cycle, the ship's fresh-water pressure system must deliver a minimum of 1 U.S.

  • Page 53: Once-Through Depressurized Rinse

    System Storage and Cleaning Connect the brine discharge line from the system to the thru-hull overboard discharge fitting. This is the normal connection for normal operation. b) If the system is equipped with an Optional Discharge Rinse/Clean Outlet Valve, position this valve to discharge through the Brine Discharge Connector.

  • Page 54: Short-Term Shutdown

    3. Clean the Plankton Filter Element. 4. Clean (hose off) or replace the 25- and 5-micron prefilter elements with new 25- and 5-micron Horizon Reverse Osmosis prefiltration elements. 5. Fill the Rinse/Clean Solution Container or a 5-gallon container with clean, fresh water.

  • Page 55: Long-Term Shutdown

    System Storage and Cleaning b) Reconnect the Sea Strainer outlet line to the outlet of the Sea Strainer, or reposition the Inlet Clean Rinse Valve to the normal operating position. IN NON-FREEZING TEMPERATURES THE SYSTEM MAY NOW BE LEFT UNATTENDED FOR SEVERAL WEEKS.
  • Page 56 Remove the charcoal filter bowl from the charcoal filter, clean the inside of the bowl and replace the element with a new Horizon Reverse Osmosis charcoal filter element. c) Remove the pH neutralizer filter bowl from the pH neutralizer filter, drain the product water from it and clean the inside of the bowl.

  • Page 57: Ro Membrane Element Cleaning Procedures

    Element. RO Membrane Element Cleaning Water and Chemical Requirements 1. The Horizon Reverse Osmosis cleaning compounds are designed to clean in a closed loop configuration moderate fouling from the RO Membrane Element. If the RO Membrane Element is excessively fouled and in-field cleaning is not successful, the RO Membrane Element may be returned to Horizon Reverse Osmosis or to one of Horizon Reverse Osmosis’s many service dealers...
  • Page 58 Caution: Never expose the RO Membrane Element to chemicals other than those supplied by Horizon Reverse Osmosis. Use caution when operating the system in harbors that may be polluted with chemicals, oil or fuel, as these chemicals may damage the RO Membrane Element beyond repair.
  • Page 59 System Storage and Cleaning MCC 2, or SRC MCC 3 (only one chemical as appropriate for the type of cleaning desired). DO NOT ADD ANY OTHER CHEMICAL. DO NOT MIX MORE THAN ONE CHEMICAL TO THE WATER. 11. Mix and thoroughly dissolve the solution in the Rinse/Clean Solution Container. 12.

  • Page 60: Closed Loop Configuration

    Closed Loop Configuration Seafari Escape 200-600...

  • Page 61: Chapter 10: Troubleshooting

    Chapter Troubleshooting Pressure Abnormalities • Vacuum/Pressure -30 - 0 - 60 • Low Pressure 0-300 PSI • High Pressure 0-1500 PSI • System shuts off due to Low Pressure • System shuts off due to High Pressure Low-Pressure Abnormalities Debris may plug up the prefilter elements causing the system to shut down. After shut-down, that same debris may loosen or settle off of the prefilter elements and down into the prefilter housing bowl.

  • Page 62: Product Water Abnormalities

    Pump output flow of water must all be matched. Upon leaving Horizon Reverse Osmosis’s factory at the time of shipment, these components have been matched and tested together as a system. If the initial Horizon Reverse Osmosis customer (distributor, dealer or boat builder) has mistakenly...

  • Page 63: Lower-Than-Normal Product Water Flow

    Troubleshooting Lower-Than-Normal Product Water Flow A blockage in the suction line, resulting in a heavy vacuum reading at the Booster Pump Inlet Compound Vacuum/Pressure Gauge, will cause the Booster Pump to cavitate and lead to a reduction of feed water flow and Booster Pump outlet pressure. The Seafari Escape System is designed to recover as product water a set percentage of the fed water.

  • Page 64: Low Product Water Quality (Increase Of Salt Content In The Product Water)

    This results in poor-quality product water. The Seafari Escape System self-adjusts the operating pressure to overcome the fouling. Eventually the High-Pressure Switch will signal the system to shut off due to excessive operating pressure above 190 PSI. Seafari Escape 200-600...

  • Page 65: Chapter 11: Electrical Information

    Caution: Review the “Check Off Q.C. Sheet” that accompanied this Owner's Manual and the Invoice that accompanied this Seafari Escape System to ensure that it has been configured from Horizon Reverse Osmosis for the appropriate and proper DC Voltage or AC Voltage, Cycles, and Phase.

  • Page 66: Electrical Requirements

    Voltage HZ (AC) Min. HZ Max. HZ Min. Voltage Max. Voltage DC Systems 12 VDC 11 VDC 15 VDC 24 VDC 22 VDC 30 VDC AC Systems 12 VDC 11 VDC 15 VDC Seafari Escape 200-600...
  • Page 67 Electrical Information Voltage HZ (AC) Min. HZ Max. HZ Min. Voltage Max. Voltage DC Systems 24 VDC 22 VDC 30 VDC 120 VAC 60 HZ 57 Hz 62 Hz 108 VAC 132 VAC 230 VAC 60 HZ 58 Hz 62 Hz 207 VAC 253 VAC 100 VAC...
  • Page 68 21.1385 0.1620 0.0206 4.1148 13.2913 0.1285 0.0130 3.2639 8.3626 0.1019 0.0082 2.5883 5.2588 0.0808 0.0051 2.0523 3.3064 0.0641 0.0032 1.6281 2.0809 0.0508 0.0020 1.2903 1.3070 0.0403 0.0013 1.0236 0.8225 0.0320 0.0008 0.8128 0.5186 0.0254 0.0005 0.6452 0.3267 Seafari Escape 200-600...
  • Page 69 Electrical Information American Wire Gauge Metric Wire Gauge Metric Wire dia inch sq. inch dia mm sq mm Size mm² 0000 0.4600 0.1661 11.6840 107.1649 0.4096 0.1317 10.4038 84.9683 0.3648 0.1045 9.2659 67.3980 0.3249 0.0829 8.2525 53.4609 0.2893 0.0657 7.3482 42.3871 0.2576 0.0521...

  • Page 70: Chapter 12: Exploded Parts View

    Chapter Exploded Parts View H030C SEAFARI ESCAPE COMPACT ITEM NO. QTY. PART NUMBER DESCRIPTION B589380009 PREFILTER ASSY UW-SE 05 MIC B107380002 PREFILTER ASSY UW-SE 25 MIC B196300002 MEMBRANE VESSEL ASSY 400 GPD B502380002 MANIFOLD PROD ASSY UW-SE B595390012 CONTROLLER SEC 12VDC B007300014 FEED PUMP ASSY UWSE 400-1-3-12VDC B145380001...

  • Page 71: H031M Seafari Escape Modular

    FEED PUMP ASSY UW-SE,600, 1-2, 12VDC B594380001 FRONT PANEL ASSY UW-SE B107380004 PREFILTER ASSY UW-SE M4-600 B521220002 CHARCOAL FILTER ASSY 170-350-UW B595390012M CONTROLLER SEC 12VDC B598000005 FRESH WATER FLUSH UW-SE,12V B196380003 MEMBRANE VESSEL ASSY 600 UWM B006380001 SEA STRAINER UW-SE Seafari Escape 200-600...
  • Page 72 Exploded Parts View 46.84 [1190] 13.09 [332] 7.15 [182] 16.65 [423] 16.95 [431] R3.62 [92] 8.15 [207] 10.57 [269] 20.67 [525]...
  • Page 73 Seafari Escape 200-600...

  • Page 74: B006380001 Sea Strainer Uw-Se

    Exploded Parts View B006380001 SEA STRAINER UW-SE ITEM NO. QTY. PART NUMBER DESCRIPTION 0412061278 SEA STRAINER 1.00 20200402010 BRACKET SEA STRAINER AS 0101072583 ELB90 0.50 MPT x 0.50 BARB 0101294283 RB 1.00 MT x 0.50 FT 061172143016 SC,HEX A,.25x1.00,SS 05181434AA HOSE CLAMP .75 SS 061100043000 WASHER,FLAT,OS,1/4",SS...
  • Page 75 Seafari Escape 200-600...

  • Page 76: B152380002 Etd-Pump Assy Uw-Se

    Exploded Parts View B152380002 ETD-PUMP ASSY UW-SE ITEM NO. QTY. PART NUMBER DESCRIPTION 12181301DS ETD PUMP-NEW 1421081200 VALVE SOLENOID 12VDC UWDX 0117491869 TEE RUN .375 MPT X .375 FPT X.375 FPT SS 1317081769 CONN -6 FLARE X .375 MNPT SS 0112021800 ELB90 .375 MNPT x .62 BARB NYLON 0117362469...
  • Page 77 Seafari Escape 200-600...

  • Page 78: Feed Pump Uw-Se 200-400 1/3Hp 12Vdc

    Exploded Parts View FEED PUMP UW-SE 200-400 1/3HP 12VDC ITEM NO. QTY. PART NUMBER DESCRIPTION 150933110CF MOTOR .33HP 12 VDC 2115030120 RUBBER MOUNT 55 AQUA SERIES 0112651806 ADAP .375 MPT X .625 BARB NYLON 0204020869 ELBOW,PP,1/4 ODx1/4 MT 061172143016 SCREX,HEX A,.25x1.00,SS 0117341869 PLUG .375 MNPT SS 05181434AA...
  • Page 79 RECOMMENDED SPARES: QTY. PART NUMBER DESCRIPTION B653220001 HPP -C SEAL KIT B654220001 HPP -C INLET VALVE REBUILD KIT B652220001 HPP -C PMP KIT SEALS/VALVES Seafari Escape 200-600...

  • Page 80: Feed Pump Uw-Se 200-400 1/3Hp 24Vdc

    Exploded Parts View FEED PUMP UW-SE 200-400 1/3HP 24VDC ITEM NO. QTY. PART NUMBER DESCRIPTION 15103210CF MOTOR .33HP 24 VDC 2115030120 RUBBER MOUNT 55 AQUA SERIES 0112651806 ADAP .375 MPT X .625 BARB NYLON 0204020869 ELBOW,PP,1/4 ODx1/4 MT 061172143016 SCREX,HEX A,.25x1.00,SS 0117341869 PLUG .375 MNPT SS 05181434AA...
  • Page 81 RECOMMENDED SPARES: QTY. PART NUMBER DESCRIPTION B653220001 HPP -C SEAL KIT B654220001 HPP -C INLET VALVE REBUILD KIT B652220001 HPP -C PMP KIT SEALS/VALVES Seafari Escape 200-600...

  • Page 82: Feed Pump Uw-Se 200-400 1/3 110-220Vdc

    Exploded Parts View FEED PUMP UW-SE 200-400 1/3 110-220VDC ITEM NO. QTY. PART NUMBER DESCRIPTION 15AG250912 MOTOR .33 HP 50-60-1 1920023632 STRAIN RELIEF 90 CG90-6250 2115030120 RUBBER MOUNT 55 AQUA SERIES 0112651806 ADAP .375 MPT X .625 BARB NYLON 0204020869 ELBOW,PP,1/4 ODx1/4 MT 061172143016 SCREX,HEX A,.25x1.00,SS...
  • Page 83 RECOMMENDED SPARES: QTY. PART NUMBER DESCRIPTION B653220001 HPP -C SEAL KIT B654220001 HPP -C INLET VALVE REBUILD KIT B652220001 HPP -C PMP KIT SEALS/VALVES Seafari Escape 200-600...
  • Page 84 Exploded Parts View B007300011 FEED PUMP UW-SE 600 110/220 ITEM NO. QTY. PART NUMBER DESCRIPTION 1218182422 HP PUMP 3.5 GPM SS 1519071010 MOTOR 1-2 HP 115-230 56C-1725 1920023632 STRAIN RELIEF 90 CG90-6250 2115030120 RUBBER MOUNT 55 AQUA SERIES 0112651806 ADAP .375 MPT X .625 BARB NYLON 0204020869 ELBOW,PP,1/4 ODx1/4 MT 061172143016...
  • Page 85 RECOMMENDED SPARES: QTY. PART NUMBER DESCRIPTION B653220001 HPP -C SEAL KIT B654220001 HPP -C INLET VALVE REBUILD KIT B652220001 HPP -C PMP KIT SEALS/VALVES Seafari Escape 200-600...

  • Page 86: B007300017 Feed Pump Uw-Se 600 1/2 24Vdc

    Exploded Parts View B007300017 FEED PUMP UW-SE 600 1/2 24VDC ITEM NO. QTY. PART NUMBER DESCRIPTION 15103210CF MOTOR .33HP 24 VDC 2115030120 RUBBER MOUNT 55 AQUA SERIES 0112651806 ADAP .375 MPT X .625 BARB NYLON 0204020869 ELBOW,PP,1/4 ODx1/4 MT 061172143016 SCREX,HEX A,.25x1.00,SS 0117341869 PLUG .375 MNPT SS...
  • Page 87 RECOMMENDED SPARES: QTY. PART NUMBER DESCRIPTION B653220001 HPP -C SEAL KIT B654220001 HPP -C INLET VALVE REBUILD KIT B652220001 HPP -C PMP KIT SEALS/VALVES Seafari Escape 200-600...

  • Page 88: B008220001 Plankton Filter Assy Uw-Se

    Exploded Parts View B008220001 PLANKTON FILTER ASSY UW-SE ITEM NO. QTY. PART NUMBER DESCRIPTION 07650209ST FILTER HOUSING-LID AQUA ER 2020043810 BRACKET PLANKTON FILTER AQUA ER 0805823578 ELEMENT PLANKTON 0101072583 ELB90 0.50 MPT x 0.50 BARB 061172143016 SCREX,HEX A,.25x1.00,SS 05181434AA HOSE CLAMP .75 SS 061170628016 SC PHIL PAN A #10 X 1 SS 065080028000...
  • Page 89 Seafari Escape 200-600...

  • Page 90: B107380001 Prefilter Assy Uw-Se 05 Mic

    Exploded Parts View B107380001 PREFILTER ASSY UW-SE 05 MIC ITEM NO. QTY. PART NUMBER DESCRIPTION 07650209ST FILTER HOUSING-LID AQUA ER 0801060157 ELEMENT PREFILTER 10-05 2020043811 C BRACKET, UW-SE FRAME 0112022500 ELB90 .50 MNPT x .62 BARB NYLON 05181434AA HOSE CLAMP .75 SS 061080043000 WASHER FLAT .25 SS 061142145012...
  • Page 91 Seafari Escape 200-600...

  • Page 92: B107380002 Prefilter Assy Uw-Se 25 Mic

    Exploded Parts View B107380002 PREFILTER ASSY UW-SE 25 MIC ITEM NO. QTY. PART NUMBER DESCRIPTION 07650209ST FILTER HOUSING/LID AQUA ER 0801130257 ELEMENT PREFILTER 10-25 2020043811 C BRACKET, UW-SE FRAME 0101292383 RB 0.50 MT x 0.25 FT 01013725CL NIPPLE 0.50 NPT x CL 0101422583 TEE 0.50 FT x FT x FT 0112022500...
  • Page 93 Seafari Escape 200-600...

  • Page 94: B107380004 Prefilter Assy Uw-Se M4-600

    Exploded Parts View B107380004 PREFILTER ASSY UW-SE M4-600 ITEM NO. QTY. PART NUMBER DESCRIPTION 07650209ST FILTER HOUSING-LID AQUA ER 0801130257 ELEMENT PREFILTER 10-25 0801060157 ELEMENT PREFILTER 10-05 0101072583 ELB90 1/2 MPT X 1/2 BARB PVC 0204010869 ELB90 1/4 TUBE X 1/4 FPT PLAST 0204020869 ELB90 1/4 TUBE X 1/4 MPT PLAST 0204090869...
  • Page 95 Seafari Escape 200-600...

  • Page 96: Membrane Vessel 200 - 600 Gpd Compact

    Exploded Parts View MEMBRANE VESSEL 200 - 600 GPD COMPACT ITEM NO. QTY. PART NUMBER DESCRIPTION 0520210600 RETAINER PORT MVA 05202401GR BRACKET,MVA U-CLAMP,3 IN 2453502400 END PLUG SINGLE 3 AW 2453512400 END PLUG DUAL 3 IN AW 2615180100 FELT ADHESIVE 0.125 X 0.75 STRIP 0101370815 NIPPLE 0.25 NPT x 1.50 0117410800...
  • Page 97 3.50 a. 27.94" [710 mm] Seafari Escape 200 Compact b. 46.94" [710 mm] Seafari Escape 400 & 600 Compact Seafari Escape 200-600...

  • Page 98: Membrane Vessel 200 - 600 Gpd Modular

    Exploded Parts View MEMBRANE VESSEL 200 - 600 GPD MODULAR ITEM NO. QTY. PART NUMBER DESCRIPTION 0520051900 MVA RACK UW-SE 0520210600 RETAINER PORT MVA 05202401GR BRACKET,MVA U-CLAMP,3 IN 2453502400 END PLUG SINGLE 3 AW 2453512400 END PLUG DUAL 3 IN AW 2615180100 FELT ADHESIVE 0.125 X 0.75 STRIP 0101370815...
  • Page 99 27.94" [710 mm] Seafari Escape 200 Modular b. 46.94" [1192 mm] Seafari Escape 400 & 600 Modular Seafari Escape 200-600...

  • Page 100: B502380001 Manifold Prod Assy Uwm

    Exploded Parts View B502380001 MANIFOLD PROD ASSY UWM ITEM NO. QTY. PART NUMBER DESCRIPTION 5333380200 MANIFOLD PRODUCT 1401096100 VALVE SOLENOID 12VDC 3131680100 CONNECTOR,PLUG,SWITCH,4 DIN 1105320253 FLOW METER B511080003 SALINITY PROBE ASSY 0204021769 ELB90 .375 TUBE x .25 MNPT PLASTIC 0204020869 ELBOW,PP,1/4 ODx1/4 MT 2614014600 O-RING 113 PLUG PRODUCT AW-FM...

  • Page 101: B502380002 Manifold Prod Assy Uw-Se

    TEE 0.25 FT x FT x FT 2614014600 O-RING 113 PLUG PRODUCT AW-FM H30612730006 INSERT 8-32 X .31-18 SS 061160526048 SC 8-32 x 3.00 SS 061161630008 SC PHIL FLAT 10-24 X 1-2 SS 569031012A SC SOC 6-32 X 75 SS Seafari Escape 200-600...

  • Page 102: H2521210001 Charcoal Filter Assy

    Exploded Parts View H2521210001 CHARCOAL FILTER ASSY ITEM NO. QTY. PART NUMBER DESCRIPTION 20200402102 BRACKET SINGLE FILTER 0713020573 FILTER HOUSING-LID .375 X 10 ASM 0803004773 ELEMENT CHARCOAL 10.0 0204020969 ELB90 .25 TUBE x .375 MPT PLASTIC 0204021869 ELBOW,SS,3/8 ODx3/8 MT 061170628016 SC PHIL PAN A #10 X 1 SS 061170628020...
  • Page 103 Seafari Escape 200-600...

  • Page 104: B561080001 Ph Neutralizer Assy 0.5-1.5 Gpm

    Exploded Parts View B561080001 PH NEUTRALIZER ASSY 0.5-1.5 GPM ITEM NO. QTY. PART NUMBER DESCRIPTION 20200402102 BRACKET SINGLE FILTER 0713020573 FILTER HOUSING-LID .375 X 10 ASM 08251950AS ELEMENT POST FILTER PH 9.75 IN 0204020969 ELB90 .25 TUBE x .375 MPT PLASTIC 0204021869 ELBOW,SS,3/8 ODx3/8 MT 061172143016...
  • Page 105 RECOMMENDED SPARES: QTY. PART NUMBER DESCRIPTION 2614010473 ORING BLUE HSG 237 Seafari Escape 200-600...

  • Page 106: B591120001 Clean And Rinse Kit

    Exploded Parts View B591120001 CLEAN AND RINSE KIT ITEM NO. QTY. PART NUMBER DESCRIPTION 20200404040 BRACKET-CLEAN AND RINSE KIT 0101063783 ELB90 .75 FPT X .75 BARB PVC 0101613783 ADAP .75 FNPT x .75 BARB PVC 14011334AR VALVE 3-WAY BALL .75 MPT 0501164200 PIPE SUPPORT 1.125 05181434AA...
  • Page 107 OUTLET TO RINSE/CLEAN BUCKET [44] INLET FEED WATER FROM SEA STRAINER [4] OUTLET OUTLET TO BRINE DISCHARGE CONNECTOR [30] INLET FEED WATER FROM SEA STRAINER [4] OUTLET INLET BRINE DISCHARGE FROM OUTLET TO BOOSTER SYSTEM OUTLET PUMP [6] INLET Seafari Escape 200-600...

  • Page 108: B598000005 Fresh Water Flush Uw-Se

    Exploded Parts View B598000005 FRESH WATER FLUSH UW-SE Select (Options): (01) 12V, (02) 24V, (03) 110V, (04) 220V ITEM NO. QTY. PART NUMBER DESCRIPTION 2017043812 BRACKET FWF UW-SE 0803004473 ELEMENT CARBON BRIQUETTE 5.0 IN 2020040002 BRACKET CHECK VALVE FWF 0713020173 FILTER HOUSING-LID 0.375 X 5.0 14012118AR VALVE CHECK 3/4"...
  • Page 109 ADAP 3/8MPTx5/8BARB NYL 0112071900 ELB90 3/8MPTx1/2BARB NYL Option 4: Fresh Water Flush UW-SE, 220V ITEM NO. QTY. PART NUMBER DESCRIPTION 12124004SF BOOSTER PMP/MTR 220V AW170 0112021800 ELB90 3/8MPTx5/8BARB NYL 0112651806 ADAP 3/8MPTx5/8BARB NYL 0112071900 ELB90 3/8MPTx1/2BARB NYL Seafari Escape 200-600...
  • Page 110 Exploded Parts View...

  • Page 111: 1401096100 3-Way Product Water Diversion Solenoid Valve

    1401096100 3-WAY PRODUCT WATER DIVERSION SOLENOID VALVE PORT DESIGNATION & DESCRIPTION (WATER FLOW) Seafari Escape 200-600...

  • Page 112: B5262000Cv Uv Sterilizer

    Exploded Parts View B5262000CV UV STERILIZER ITEM NO. QTY. PART NUMBER DESCRIPTION 20010418001A BRACKET MNT SADDLE UV-AW TOP 20010418002A BRACKET MNT SADDLE UV-AW BTTM 40000306CV UV STERILIZER 2 GPM 12VDC 0204021769 ELB90 .375 TUBE x .25 MNPT PLASTIC 0204091869 FITTING,PP,3/8 ODx3/8 MT 0254011000 ELB90 0.25 MPT X 0.50BARB NY 05181432AA...
  • Page 113 Seafari Escape 200-600...

  • Page 114: H2606210005 Remote Assy Hro Sf Se 170Sf

    Exploded Parts View H2606210005 REMOTE ASSY HRO SF SE 170SF ITEM NO. QTY. PART NUMBER DESCRIPTION 4900283104 CABLE MULTIST 8 CON WHT 3131100900 EZ PLUG RJ45 31315609WE REMOTE TOUCH PAD HRO...

  • Page 115: B001380001 Installation Kit

    CONN 3/8 TUBE X 1/4 MPT PLASTIC 50 ft 0312123569 TUBE 3/8 BLACK 0204021769 ELB90 3/8 TUBE X ¼ MPT PLASTIC 0101292483 RB 1/2MPT X 3/8FPT PVC80 0204171869 TEE BRANCH 3/8TU X3/8TUX3/8MPT 0112652506 APAP 1/2 MPTX5/8 BARB NYL B651390001B OWNERS MANUAL SEAFARI ESCAPE Seafari Escape 200-600...
  • Page 116 Exploded Parts View...

  • Page 117: Hp Hose Assembly

    HP HOSE ASSEMBLY ITEM NO. QTY. PART NUMBER DESCRIPTION 2432160669 HOSE HP - 6P 1317481969 SWIVEL FITTING - 6 SSP Seafari Escape 200-600...

  • Page 118: Available Tubes And Fittings

    Exploded Parts View AVAILABLE TUBES AND FITTINGS PART NO DESCRIPTION 1. CONNECTOR MALE 0204090669 1/4 inch tube x 1/8 inch mnpt 0204090869 1/4 inch tube x 1/4 inch mnpt 0204091669 3/8 inch tube x 1/8 inch mnpt 0204091769 3/8 inch tube x 1/4 inch mnpt 0204091869 3/8 inch tube x 3/8 inch mnpt 0204091969...
  • Page 119 3/8 inch tube x 1/4 inch mnpt 0204171869 3/8 inch tube x 3/8 inch mnpt 0204172469 1/2 inch tube x 3/8 inch mnpt 0204172569 1/2 inch tube x 1/2 inch mnpt 0204172969 5/8 inch tube x 1/2 inch mnpt 7. UNION TEE Seafari Escape 200-600...
  • Page 120 Exploded Parts View PART NO DESCRIPTION 0204240869 1/4 inch tube 0204241869 3/8 inch tube 0204242469 1/2 inch tube x 3/8 inch tube 0204242569 1/2 inch tube 0204242869 5/8 inch tube x 3/8 inch tube 0204243069 5/8 inch tube 8. UNION 0204210869 1/4 inch tube 0204211769...

  • Page 121: Tube Compression Fittings Replacement Parts

    NUT/SPACER/GRAB & O-RING 3/8" 0204-3/869 TUBE 3/8 BLACK 0312123569 FOR 1/2" O.D. TUBE NUT/SPACE/GRAB & O-RING 1/2" 0204-1/269 TUBE 1/2 BLACK NO SUBSTITUTE 0312124269 FOR 5/8" O.D. TUBE NUT/SPACER/GRAB & O-RING 5/8" 0204-5/869 TUBE 5/8 BLACK POLYPRO 0305125169 Seafari Escape 200-600...

This manual is also suitable for:

Seafari escape 400Seafari escape 600

Table of Contents