Table of Contents
Advertisement
SAFETY
Please follow all warnings, precautions and maintenance as recommended in this user manual.
Safety Instructions
‡
Only use attachments/accessories specified by the manufacturer.
‡
Do not block any ventilation openings. To ensure reliable operation of the device and to protect from
overheating, it is recommended to install the device in a location that does not block ventilation. Do not
put the device in an enclosure such as a book case or a cabinet that restricts air flow.
‡
Do not use the device near water or moisture. To reduce the risk of fire and/or electric shock, do not
expose the device to rain or moisture.
‡
Do not install near heat sources such as radiators, heaters, stoves or any other apparatus, such as
amplifiers, that emits heat.
‡
Do not let objects or liquids enter the device. They may touch dangerous voltage ports or short out parts
that could result in fire or electric shock.
‡
Do not place the device on an unstable surface. The device may fall over, resulting in injury or damage
to the device.
‡
Do not setup the device in places where it might be subject to vibration or shock.
‡
Do not use any hard or sharp object to operate the touch screen.
‡
Do not use the device if it has been physically damaged or abused. Physical damage/abuse would be
(but not limited to):
±
The device has been dropped.
±
Power supply cord or plug has been damaged.
±
Liquid has been spilled on to the device.
±
The device has been exposed to rain or moisture.
±
Something has fallen in the device or something is loose inside.
‡
Do not attempt to service the device yourself. Opening or removing covers may expose you to dangerous
voltages or other hazards. Please call Optoma before you send the device for repair.
‡
Disconnect the power plug from AC outlet if the device is not being used for a long period of time.
‡
Remove the batteries from the remote control before storage. If the batteries are left in the remote for
long periods, they may leak.
‡
Turn off and unplug the power plug from the AC outlet before cleaning the device.
‡
Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners,
waxes or solvents to clean the device.
‡
See the device enclosure for safety related markings.
‡
The device should only be repaired by appropriate service personnel.
5
English
Advertisement
Table of Contents
