Remote Control Operating Range - Optoma 5652RK User Manual

SETUP AND INSTALLATION

Remote Control Operating Range

When using the remote control, make sure to point it within ±30° to the IR receiver on the IFP. The distance
between the remote control and the IR sensor window should not be longer than 8 meters.
‡ Make sure that there are no obstacles between the remote control and the IR sensor window on the
IFP that might obstruct the infra-red beam.
‡ Make sure the IR transmitter of the remote control is not being used in sunlight or fluorescent lamps
directly.
‡ If the remote control is closed to Inverter-Type fluorescent lamps, it might become ineffective from time
to time.
‡ If the remote control and the IFP are within a very short distance, the remote control might become
ineffective.
22 English
30° 30°
8M