MLM818 Description This 4 in 1 digital lock has a dead bolt latch. A stylish lock with a Bluetooth App, pin code, RFID card and manual key to provide quick and convenient access. Specifications ▪ Unlocking methods: Bluetooth App, RFID Card, Pass code, Wristband, fingerprint or Key ▪...
MLM818 System Specifications Connectivity Bluetooth 4.0, Wi-Fi (Wi-Fi Bridge required) Case Material Aluminium Alloy TTLock App, Card (Mifare 13.56 MHz), Code, fingerprint IP Rating IP65 Identification Mode and Bluetooth Finish Satin Nickel or Black User Capacity Warranty 24 Months Identification Time Instant recognition under 0.3 seconds...
Page 4
INFORMATION AND SAFTY WARNINGS : 1.1 Introduction: This user manual will guide you through the functions and usages of our MLM818 Bluetooth enabled smart lock. It is important that you follow the instructions and regard all notes that appear throughout this manual.
MLM818 Installation Diagram 1. Drill a large and a small hole on the 6. Insert the plug of the front lock into door for the front and rear panel and socket of the rear lock and insert the drill a round hole on the door frame thin bar into the hole of the knob.
Need help?
Do you have a question about the MLM818 and is the answer not in the manual?
Questions and answers