EDWARDS SYSTEMS TECHNOLOGY EST3 Manual page 11

EST3 International Installation Supplement Manual
Technical Manuals Online! - http://www.tech-man.com
The EST3 life safety system has been approved/certified to EN
54-2, -4: 1997 by LPCB along with the following options with
requirements:
• output to fire alarm devices
• alarm counter
• fault signals from points
• test conditions
• standardized input/output interface.
The products that were found compliant are listed in Table 1-1.
Table 1-1: LPCB/EN-54-compliant products
Models
3-CAB7B-E,
3-CAB7D(R)-E
3-CAB14-E,
3-CAB14D(R)-E
3-CAB21-E
3-CAB21D(R)-E
3-RCC7R-E
3-RCC14R-E
3-RCC21R-E
3-6ANN-E (R)
3-10ANN-E (R)
3-LCDANN-E
3-PPS/M-230-E
3-BPS/M-230-E
firealarmresources.com
European Marketplace: Installation
Description
1-chassis wall box with E-series inner
and outer doors. Available in surface or
semi-flush mounting.
2-chassis wall box with E-series inner
and outer doors. Available in surface or
semi-flush mounting.
3-chassis wall box with E-series inner
and outer doors. Available in surface or
semi-flush mounting.
1-chassis wall box with solid door
(same as US model). Available in
surface or semi-flush mounting.
2-chassis wall box with solid door
(same as US model). Available in
surface or semi-flush mounting.
3-chassis wall box with solid door
(same as US model). Available in
surface or semi-flush mounting.
6-position base annunciator; includes
door, CPU, 2 annunciator support
modules, and 5 blank filler plates.
10-position base annunciator; includes
door, CPU, 2 annunciator support
modules, and 9 blank filler plates.
Remote command module annunciator;
includes door, LCD, and CPU.
IEC950-compliant Primary Supply with
Power Distribution
IEC950-compliant Booster Supply
1.3