Hotel Mode - Toshiba 40BV700 Service Manual

HOTEL MODE

The HOTEL TV is a special mode which restricts some operations of TV. This allows the
customer to use the TV in hotels or in Hospitals. The specifications of a hotel TV are
basically given below:
1. The user cannot increase the volume above a specified limit.
2. The user cannot reach some menus.
3. Other than the status OSDs, no other menu OSDs will be visible (Install menu, picture
menu, program table etc..). For this reason no adjustments could be done.
4. Source options can be selected via remote control.
5. General teletext functions can be used.
6. Volume level can be fixed and the user can not change volume level.
7. If a last status setting is made active, the TV will switch on in the last mode.
Activating the Hotel TV
To reach the Hotel Mode Settings menu, you should do the followings:
1. Go to the Main Menu and press the 7, 9, 3, and 5 sequentially. The "HOTEL MODE"
settings will appear.
2. Set Hotel Mode as Yes in the service menu.
"Hotel Mode": Yes in the service menu makes the TV customer specific. If this setting is
set to No, you cannot use the TV as Hotel TV anytime.
To configure the TV as a normal TV again,
1. Go to "HOTEL MODE SETTINGS" Menu as described before. (Press menu button.
Though you see nothing on the TV screen, press the 7, 9, 3, 5 sequentially.)
2. Set "HOTEL MODE" item as "NO". Now, the Hotel Mode is deactivated.