Skoda Karoq 2018 Workshop Manual page 144

Karoq 2018 ➤
Electrical system - Edition 10.2017
Note
Do not touch the glass when installing the light bulb. Your fingers
will leave traces of grease on the glass which then evaporate
when the bulb is switched on causing it to cloud.
Removing
– Switch off the ignition and all electrical components.
– Carefully prise off lens in the marked areas -arrows-.
– Remove the defective light bulb (W5W) and replace it.
Installing
Installation is carried out in the reverse order.
1.10.2 Replace bulb for interior lighting in vehi‐
cles without a panoramic roof
Note
Do not touch the glass when installing the light bulb. Your fingers
will leave traces of grease on the glass which then evaporate
when the bulb is switched on causing it to cloud.
Removing
– Switch off the ignition and all electrical components.
– Remove front interior light
⇒ "2.21.2 Removing and installing front interior light/reading
light, vehicles without panoramic sunroof", page 151
– Turn the socket with the bulb -arrows- and remove.
136
Rep. gr.96 - Lights, bulbs, switches - interior
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
.