6� Tweaker Menu - Biostar BIOS Z590I VALKYRIE User Manual

This submenu allows you to change voltage and clock of various devices.
Note
» We suggest you use the default setting. Changing the voltage and clock improperly may damage the
device.
» The options and default settings might be different by RAM or CPU models.
» Beware of that setting inappropriate values in items of this menu may cause system to malfunction.
- Values in Red: Danger
- Values in Yellow: Warning
- Values in White: Normal
Start Page
You can set the entrance page when you enter UEFI BIOS Setup.
Options: Page – Main (Default) / Page – Advanced / Page – Chipset / Page – Boot / Page – Security
/ Page – Tweaker / Page – Save & Exit
Clock Frequency
This item in 10kHz increments. SPecifies new BCLK frequency to be appliced. Frequency is
rounded to nearest valid value. Allowed range is limited by the Max/Min supported frequencies.
Changes are not applied until settings are saved and platform resets.
Options: 100.00 (Default)
Spread %
This item in 10kHz increments. SPecifies new BCLK frequency to be appliced. Frequency is
rounded to nearest valid value. Allowed range is limited by the Max/Min supported frequencies.
Changes are not applied until settings are saved and platform resets.
Options: 0.36 (Default)
6� Tweaker Menu
Z590I VALKYRIE
6. Tweaker Menu | 35