Advertisement
ALIGNMENT SETTINGS
(The figures below are nominal and used for representative purposes only.)
1.
Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v) on the customer
controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV
into the Service Mode.
2.
Press the RED / GREEN buttons to step up / down through the functions.
3.
Press the YELLOW / BLUE buttons to alter the function values.
4.
Press the STR button after each adjustment has been made to store the required values.
5.
To exit the Service Mode, press the "N" button.
Alignment Function
Horizontal Position
Vertical Position
Horizontal Amplitude
Vertical Amplitude
Parabola
Trapezoid
Horizontal Parallel
Vertical Linearity
Top Corner
Bottom Corner
Vertical Symmetry Correction
Center Correction
DAF - Phase
Highlight
Lowlight
Sub-Brightness
Video Gain 2
Splitter Gain (Tuner)
All manuals and user guides at all-guides.com
H – Pos
97
V – Pos
111
H – Amp
86
V – Amp
134
Parabola
26
Trapezoid
124
H – Parallel
13
V – Linear
34
Top – Corner
20
Bottom – Corner
20
V – S – Correct
9
C – Correct
10
DAF – Phase
205
High
0144 0126 0128
Low
0331 0340 0384
Sub-Brightness
144
Video Gain 2
157
SPL. Gain
0
7
Settings / Special features
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Optimum setting.
Advertisement
