Sony Trinitron CPD-100GS Operating Instructions Manual page 14

Customizing Your Monitor
Changing the on-screen display position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1
Press the MENU button.
The MENU OSD appears.
MENU
2 Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
3 Press the ¨./> buttons to select "
POSITION)" or " (OSD V POSITION)."
Select " (OSD H POSITION)" to adjust the horizontal
position.
Select " (OSD V POSITION)" to adjust the vertical
position.
4 Press the >?// buttons to move the OSD to the
desired position.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
14
Locking the controls
The control lock function disables all of the buttons on the
front panel except the u (power) switch and MENU button.
1
2
OPTION
ON
MANUAL DEGAUSS
(OSD H
3
OPTION
OSD H POSITION
4
OPTION
The OPTION OSD automatically disappears after about 30
OSD V POSITION
seconds.
To close the OSD, press the MENU button again.
Once you select "ON," you cannot select any items except
"EXIT" and "
If you press any button other than the u (power) switch and
MENU button, the
To cancel the control lock
Repeat steps 1 through 3 above and press the >?//
buttons to select "OFF."
Press the MENU button.
The MENU OSD appears.
MENU
Press the ¨./> and >?// buttons to select "
OPTION," and press the MENU button again.
The OPTION OSD appears.
Press the ¨./> buttons to select "
LOCK)."
Press the >?// buttons to select "ON."
OPTION" in the MENU OSD.
mark appears on the screen.
OPTION
ON
MANUAL DEGAUSS
(CONTROL
OPTION
OFF ON
CONTROL LOCK