Intel LGA775 User Manual page 46

BIOS SETUP
AC97 Audio
The default setting of the AC97 Audio is Auto.
CSA LAN (Giga-LAN)
The field enables or disables this Intel Giga BaseT Ethernet controller.
Init Display First
By default, the system initializes the PCI Slot VGA when the system
boots.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the board and you wish to use it. If you install an add-in FDC
or the system has no floppy drive, select Disabled in this field. This
option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default values for these ports are:
Serial Port 1
Serial Port 2
Serial Port 3
Serial Port 4
Parallel Port
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is Normal. Other options include IrDA and ASKIR.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP
EPP
ECP
PWRON After PWR-Fail
This field sets the system power status whether on or off when power
returns to the system from a power failure situation.
42
3F8/IRQ4
2F8/IRQ3
3E8/IRQ11
Disabled/IRQ10
378H/IRQ7
Standard Printer Port
Enhanced Parallel Port
Extended Capabilities Port
2801550 User's Manual