TECHNICAL DATA Description: Wall Mounted Surround Fireplace Suite Model: WL45033N Rated Voltage: 220-240V Frequency: 50/60Hz Power Consumption: 2000W Remote Control: 1 x 3V lithium button cell battery DOCUMENTATION We declare that this product conforms to the following product legislation in accordance with the...
Page 3
[EARTH] terminal. and immediately dispose of it in a safe manner. Never attempt to reuse the plug or insert it into a socket outlet as there is a danger of an electric shock. WARNING: This Appliance MUST be Earthed www.warmlite.co...
PRODUCT SAFETY When using any electrical appliance, basic safety precautions should always be followed including the following: • Check that the voltage of the as this could create a fire main circuit corresponds with hazard. The appliance must the rating of the appliance not be located immediately before operating.
Page 5
• Children should not play with • In order to avoid overheating, the appliance. do not cover the heater. www.warmlite.co...
Page 6
• This appliance can be • Please ensure that the used by children aged appliance is used on a from 8 years and above stable, level, and heat and persons with reduced resistant surface. physical, sensory or mental • If the supply cord or capabilities or lack of appliance is damaged, experience and knowledge...
Page 7
• In the unlikely event the appliance develops a fault, stop using it immediately and seek advice from the Customer Support Team. HIGH VOLTAGE HOT SURFACE DO NOT COVER www.warmlite.co...
WHAT’S IN THE BOX Instruction Manual Overhead Lamps Wall Fire Suite Control Panel Remote LED Flame Effect Fixing Kit Remote Control WARNING: This product must be installed correctly, failure to do so may result in injury, electric shock to the user or damage to your product and your Property. TOOLS NEEDED (not supplied) 2mm pilot drill bit &...
Carefully lift the appliance up, ensuring • Press the I switch to select the 1000W that the top rear ledge of the wall fire heat setting. The Heat 1 display will engages with the wall bracket and is illuminate to indicate this setting has been sitting centrally.
The temperature will increase or Note: control or the unit’s control panel will have no decrease by increments of 1 , from 16 up to effect. www.warmlite.co...
TURNING THE LAMPS ON AND OFF Aside from the flame effect, the small lamps to starting day. The corresponding indicators either side of the unit can also be turned on or or digits on the LCD control panel will off as required. flash to indicate they have been selected and can now be adjusted.
Ensure that the air vents are free from room where the fire is ON and unguarded. obstruction. • Never obstruct or cover the fan outlet or Plug the power cord back in to the mains force items into fire openings. socket. www.warmlite.co...
Turn the fire back on. CLEANING AND CARE If the fire fails to operate, check the fuse Warning- Always disconnect from the mains in the plug. supply before cleaning the wall fire. If the fuse in the plug is OK and the fire •...
Page 15
Model Identifier(s): WL45033N Item Symbol Valve Unit Item Unit Type of heat input for electric storage, local Heat Output space heaters only (select one) Nominal heat Manual heat charge with integrated Pnom output thermostat Minimum heat Manual heat charge control with room...
Page 16
1 year peace of mind. *To receive your extra guarantee period, register your appliance online within 28 days of purchase by visiting: www.warmlite.co Make sure to retain your original receipt. Should you have a problem...
Need help?
Do you have a question about the WL45033N and is the answer not in the manual?
Questions and answers